Setup Guide

ThinOS will look on the le server for this exact rmware name. If
that dened rmware name is not found, then ThinOS will fall back
to the default logic and look for the DOVE_boot rmware.
ECFirmware is only used for Wyse 3010 thin client with ThinOS
(T10)/X10J/X10CJ to update EC rmware, it is not supported on
other platforms.
C: C10LE V: VL10
S: S10 R: R10L
Wyse 3010 thin client with ThinOS (T10)
If the ECFirmware le name is not specied, device will look for EC
with default name: T10: T10_EC.bin
Proxy={yes, no}
AppList={ccm;fr;rtme;wms}
[Type={Global, http, https, socks5}]
[Server=_host_port_]
[User=_user_name]
[Password=_password_]
[Encrypt={yes, no}]
Species the proxy settings which are saved in non-volatile
memory. If Proxy=no, all proxy settings are cleared and all
the followed options are ignored.
If Proxy=yes, the option AppList must be followed. It species
which applications are applied to connect through proxy. WMS,
CCM, FR, and RTME are supported. The application name is
separated with semicolon.
NOTE: Wyse Management Suite is the successor to Cloud
Client Manager (CCM).
The following options are used to congure one or several proxy
server setting. The option Type species the proxy protocol
including http, https and socks5. The option Server species the url
of the proxy server. The option User and Password specify the
credentials of this proxy server. The option Encrypt species if the
password is encrypted or not.
The option User and Password can support system variables.
Because CCM runs before sign on, it is not appropriate to use $UN
and $PW.
If Type=Global, the proxy settings are saved into http proxy setting,
and the https and socks5 proxy settings use the same setting as
http proxy. And the followed proxy settings will be ignored.
For example,
Proxy=yes AppList=fr \
Type=http Server=server1:1234 user=$UN password=$PW
(OR)
Proxy=yes AppList=ccm \
Type=http Server=server1:1234 user=abc password=xyz \
Type=socks5 Server=server2:4321 user=abc password=1234
(OR)
Proxy=yes AppList=ccm;fr;rtme \
Type=Global Server=server_global user=user_global
password=password_global_encrypted Encrypt=yes
RapportDisable={yes, no}
Set to yes to disable the Rapport agent.
32 Parameters for wnos INI les only