Setup Guide
session or the terminal is idle for specied idle minutes. If the
session is still active, the reboot is delayed till the idle time is
reached or log o the sessions.
For example,
If you set Reboot=yes time=20:30, the unit reboots on local time
20:30. If you set Reboot=yes time=20:30-4:30, the unit reboots on
random time through 20:30 to 4:30.
If you set Reboot=yes time=23:00 Wday=Friday,Monday, the unit
reboots on local time 23:00 of Friday and Monday.
If you set Reboot=yes time=1:00 Idle=10, the unit reboots on 1:00, if
there are no sessions. If there is any active session, the reboot
happens only if the unit is idle for 10 minutes or the system logs out
from the session.
Since 8.3_012 or later, scheduling a shutdown at a given time is
supported. The options are same as schedule a reboot as above.
For example, Set Shutdown=yes time=20:30, the unit shuts down
at local time 20:30.
RegisterWINS=yes Forces the thin client to register itself with a Microsoft WINS
server.
ScepAutoEnroll={yes, no}
AutoRenew={yes, no}
InstallCACert={yes, no}
[CountryName=country]
[State=state]
[Locality=locality]
[Organization=organization_name]
[OrganizationUnit=organization_unit]
[CommonName=common_name]
[Email=email_address]
KeyUsage=key_usage
KeyLength={1024, 2048, 4096 }
[subAltName=subject_alt_name_list]
RequestURL=scep_request_url
CACertHashType={MD5, SHA1}
CACertHash=CA_HASH_VALUE
[EnrollPwd=enrollment_password]
[EnrollPwdEnc=encrypted_enrollment_password]
[ScepAdminUrl=scep_administrator_page_url]
[ScepUser=scep_enrollment_user]
This option is to allow client automatically get
certicates and
renew certicates using SCEP protocol.
ScepAutoEnroll—Set this keyword to yes to enable client's
functionality to automatically obtain certicate.
Set AutoRenew—Set this keyword to yes to enable certicate
auto renew. Client only tries to renew certicates requested either
manually or automatically through SCEP from this client, and the
renewal is performed only after a certicate's 1/2 valid period has
passed.
Set InstallCACert—Set this keyword to yes to install the root CA's
certicate as trusted certicate after successfully getting a client
certicate.
CountryName, State, Locality, Organization, OrganizationUnit,
CommonName, Email—These keywords together compose the
subject identity of the requested client certicate. Country Name
should be two letter in uppercase, other elds are printable strings
with a length shorter than 64 bytes, and email_address should have
a '@' in it. At least one of the above elds must be congured
correctly to form the client certicate's subject identity.
KeyUsage —This option is to specify key usage of the client
certicate and should be set to a digitalSignature, keyEncipherment
or both using a ';' concatenating these two as
digitalSignature;keyEncipherment.
KeyLength—This option is to specify the key length of the client
certicate in bits, must one of the value in the list.
subAltName—This option is to specify the client certicate's
subject alternative names. It is a sequenced list of name elements,
and every element is either a DNS name or an IP address. Use ';' as
delimiter between them.
RequestURL—This option is to specify the SCEP server's service
URL. This eld must be set correctly. Do not add any protocol prex
34
Parameters for wnos INI les only