Setup Guide

Wyse 5010 thin
client/ Wyse 5040
AIO thin client/
Wyse 7010 thin
client and their
PCoIP clients
Wyse 3030 LT thin
client and their
PCoIP clients
Wyse 5060 thin
client and their
PCoIP clients
Wyse 3020 thin
client and their
PCoIP clients
Password Not Supported Not Supported Not Supported
Not Supported
BootOrder Supported Supported Supported
Not Supported
WakeOnLan Supported Supported Supported
Not Supported
AutoPower Supported Supported Supported Supported
BootFromUSB Supported Supported Supported
Not Supported
USBController Supported Supported Supported
Not Supported
COMController Supported Supported Supported
Not Supported
PopupMenu Supported Supported Supported
Not Supported
OnboardAudio Supported Supported Supported
Not Supported
Bluetooth Not Supported Not Supported. But
can be enabled
using the
corresponding
option from the
BIOS Interface.
Not Supported. But
can be enabled
using the
corresponding
option from the
BIOS Interface.
Not Supported
Device=DellCmos
[CurrentPassword=password]
[CurrentPasswordEnc=password encrypted]
[NewPassword=password]
[NewPasswordEnc=password encrypted]
[Audio={yes, no}]
[AdminLock={yes, no}]
[AutoPower={Disable, Daily, Workday, Days}]
[AutoPowerTime=hh:mm]
[AutoPowerDays={Sunday, Monday, Tuesday, W
ednesday, Thursday, Friday, Saturday}]
[ACRecovery={PowerO, PowerOn, LastState}]
[USBRearPort={yes, no}]
[USBFrontPort={yes, no}]
[WakeOnLan={Disable, LAN, PXE}]
[WakeOnUSB={yes, no}]
These INI parameters are applicable to thin clients with Dell standard BIOS.
Supported platforms:
• Wyse 3040 thin client with ThinOS
• Wyse 3040 thin client with PCoIP
NOTE: All DellCmos settings, except CurrentPassword and
CurrentPasswordEnc, take eect after power o restart.
CurrentPassword—This option provides the
current BIOS password for changing BIOS settings when device's admin password is
available.
CurrentPasswordEnc—This option is used to provide encrypted current password.
NewPassword—This option is used to change device's password. Current
Password is not required if device's admin password is not available.
NewPasswordEnc—This option is used to provide encrypted new password.
NOTE: Password encrypted is of higher priority. For example: If both
CurrentPassword and CurrentPasswordEnc are congured, then
CurrentPasswordEnc overwrites the CurrentPassword.
Audio—
This option enables or disables the integrated audio controller. BIOS default value
is
yes. All Dell BIOS settings take eect after the power o restart.
AdminLock—When enabled, this option
prevents user from entering setup when an admin password is set. Default value is no.
48
Parameters for wnos INI, {username} INI, and $MAC INI les