Setup Guide
After no mouse and keyboard input in 1 minute, the system will pop up a counter down
window to shut down in 30 seconds. You can cancel it.
EnablePeripherals—If the optional EnablePeripherals is set with Privilege=none, the
specied peripherals tab will be enabled. The value of the option can be a list of any
valid value separated with "," or ";". For Camera, Touchscreen and Bluetooth, they can
be enabled only, if the devices are available.
For example, Privilege=none lockdown=yes
EnablePeripherals=mouse,audio,camera,bluetooth, then mouse and audio tab will be
enabled. If there are camera and/or bluetooth devices, the camera and/or bluetooth
tab will be enabled too. The optional EnableKeyboardMouseSettings=yes can be
replaced as: Privilege=none lockdown=yes EnablePeripherals=keyboard,mouse.
FastDHCP— FastDHCP identies the gateway rst. If the gateway is same as the
network before disconnection and the previous DHCP information is valid, the same
information is used. The default value is yes.
ResourceURL={yes, no}
[Type={Picture}]
[URL=_url_path_]
[User=_user_name]
[Password=_password_]
[Encrypt={yes, no}]
The resource les have their specied default path in le server, for example, the
pictures for Showing Picture screen saver are from the folder /wnos/picture in le
server (default), and the bitmap are from /wnos/bitmap.
ResourceURL—If this option is set to yes, the subsequent options are use to
congure one or more resource URL. The system fetches the resource les from the
new URL.
If this option is set to no, all the subsequent options are to be ignored.
Type—This option species the resource type. Currently, only Picture is supported,
which is for Showing Picture screen saver.
URL—This option species a new URL of the resources.
User and Password—These options specify the credentials of the new resource URL.
Encrypt—This option species whether or not the password is encrypted. For
example, ResourceUrl=yes type=picture url=ftp://10.151.120.15/pic1 user=pteng
password=xxxxxx encrypt=no
**ScreenSaver=value{0, 1, 3, 5, 10, 15, 30}
[LockTerminal={0, 1, 2, 3}]
[Type={0, 1, 2, 3, 4}]
[VideoLink=httplink]
[VideoSpan=no]
[Unit=hour]
[Image=imagele]
[PictureTimer={2-60}]
[PictureOrder=random]
[PictureCheck=always]
[PictureLayout={stretch, tile, center}]
[Sleep={0-180}]
Screensaver— Species to put the thin client in a screensaver state when the time
limit for inactivity is reached, that is delay before starting is reached.
Default value is 10. Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
3- 3 Minutes
5 — 5 Minutes
10 — 10 Minutes
15 — 15 Minutes
30 — 30 Minutes
The default screen saver value is 10 minutes and the maximization value is 30 minutes.
LockTerminal— This is an optional parameter and species to put the thin client in
LOCK state when the screen saver is activated. Default is 0.
0 — Disabled.
58 Parameters for wnos INI, {username} INI, and $MAC INI les