Setup Guide

Wake-on-LAN allows a thin client to be turned on or woken up by a network message.
If WakeOnLAN=yes, ThinOS will respond for the Wake-On-LAN packet for a remote
wake up.
If WakeOnLAN=no, ThinOS will not respond for the Wake-On-LAN packet.
NOTE:
To use the WakeOnLAN parameter with a C10LE, the C10LE must use BIOS
version 1.0B_SPC001 or later.
Peripheral settings for wnos.ini les, {username} INI,
and $MAC INI les
The following table contains the parameters used for conguring peripheral settings such as keyboard, monitor, mouse, printers and
bluetooth devices. The underlined values are default values.
Table 8. Peripheral Settings for wnos.ini Files, {username} INI, and $MAC INI les
Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
DefaultPrinter={LPD1, LPD2, LPD3, LPD4, COM1, COM2, LPT1,
LPT2, SMB1, SMB2, SMB3, SMB4}
Species the default printer. Be sure the printer set as default is
enabled or the setting will be invalid.
Device=audio
volume={low, middle, high} or {0 to 25}
mute={0, 1, 2, 3}
[mic_vol={high, middle, low} or {0-25}]
[mic_mute={yes, no}]
[mic_boost={yes, no, 1, 2, 3, 4}]
[min_cache={1-50}]
[EnableSpeaker={yes, no}][
[playback={device name string}]
[record={device name string}]
[mic_gain_device={device name string}]
[mic_gain={1~8}]
[DPaudio=yes,no]
[local_button=yes, no]
Species
the local thin client audio volume.
volume — Default is middle. Species the volume level.
high — maximum volume
middle — medium volume
low — minimum volume
Values of 0-25 provide more exact volume level
mute — Default is 0. Option to enable/disable mute.
0 — no mute
1 — mutes audio
2 — mutes audio and system beep
3 — mutes system beep
mic_vol — Default is medium. Option to set volume levels to high,
middle or low.
high — maximum volume
middle — medium volume
low — minimum volume
Parameters for wnos INI, {username} INI, and $MAC INI
les 61