Setup Guide
If default option is not specied, the last selected group will be
selected in the next sign on.
For example:
SelectGroup=yes \
default="Sus team" \
description="Dev team" groupname=dev \
description="Sus team" \
description="SQA team" groupname=sqa \
description="guest"
Group 1: Description="Dev team" groupname=dev
The le \wnos\ini\dev\dev.ini must be created in the le server. In
the dev.ini, the broker, domain list, or connections can be dened
for the dev team.
Group 2: .Description="Sus team"
The le \wnos\ini\Sus team\Sus team.ini must be created in the
le server. In the Sus team.ini, the broker, broker list, or connections
can be dened for the Sus team.
Group3...4...n...and so on.
After a user selects a group, the system will load the group ini le
rst, and then load the \wnos\ini\{group_name}\username.ini. If
the username.ini in the group directory is not found, it will attempt
to load \wnos\ini\username.ini as before.
Because the group list may dene dierent brokers, the
SelectServerList statement will be invalid if set SelectGroup=yes.
Serial={
COM1, COM2, COM3, COM4}
[Baud={1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200}]
[Parity={None, Even, Odd}]
[Stop={1, 1.5, 2}]
[Size={5, 6, 7, 8}]
[Flow={None, XON/XOFF, CTS/RTS, Both}]
[Touch={no, yes}]
[Touch_XYReverse={no, yes}]
[Touch_type={elo, microtouch, fastpoint}]
Serial — Default is COM1. Species the local serial ports
conguration.
Baud — Species the local serial port baud rate.
Parity — Species the local serial port parity.
Stop — Species the local serial port stop.
Size — Species the local serial port size.
Flow — Species the local serial port ow.
Touch — Default is no. Yes/no option to denote that a serial touch
screen is attached.
Touch_XYReverse — Default is no. Yes/no option to denote a
reversal of the X and Y coordinates which are needed for some
touch screens.
Touch_type — Default is elo. Species the type of touchscreen
being used.
NOTE: Options must be specied in the order shown.
9035366678
**SessionCong=ALL
[unmapprinters={no, yes}]
[unmapserials={no, yes}]
SessionCong — Species the default settings of the optional
connection parameters for all sessions.
unmapprinters — Default is no. Yes/no option to un-map printers.
unmapserials — Default is no. Yes/no option to un-map serials.
82 Parameters for wnos INI, {username} INI, and $MAC INI les