Setup Guide

SessionCong=PCoIP
[USBRedirection={PCoIP, TCX}]
[ShowDisconnectMessage={yes, no}]
[ShowReconnectMessageTime=seconds]
[ResumeTimeout=seconds]
SessionCong — Species the PCoIP default settings of the
optional connection parameters for all PCoIP sessions.
USBRedirection — Default is PCoIP. Species the channel of USB
devices redirection.
ShowDisconnectMessage — Default is yes. Yes/no option to
display a disconnect message when a session is disconnected. If set
to yes, the message is displayed; if set to no, the message will only
show in the Event Log.
ShowReconnectMessaageTime— This option species the
number of seconds to show the session reconnect message box
after the session detects the network congest. The default value is
50 seconds.
ResumeTimeout—The option ResumeTimeout species the
number of seconds to wait after the reconnection dialog box
prompts, and before the session successfully reconnects. If timeout
value is reached then the session is closed. The default value is
1200 seconds.
**SessionCong=RDP
[MaxBmpCache={128 to 1024}]
[DefaultColor={0,1,2}]
[EnableNLA]={no, yes}]
[ForceSpan={no, yes}]
[EnableTSMM={yes, no}]
[EnableGFX]={yes, no}]
[EnableVOR={yes, no}]
[EnableRdpH264]={yes, no}]
[EnableRecord={yes, no}]
[EnableRFX={yes, no}]
[USBRedirection={TCX, RDP}]
[RDPScreenAlign4={yes,no}]
[WallPaper={yes, no}]
[Dragging={yes, no}]
[Animation={yes, no}]
[Theme={yes, no}]
[TosIpPrecedence={0-5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/
CS5/CS6/CS7/AF11/AF12/AF13/AF22/AF23/
AF31/AF32/AF33/AF42/AF43/EF}]
[AutoDetectNetwork={yes, no}]
SessionCong
— Species the RDP default settings of the
optional connection parameters for all RDP sessions.
MaxBmpCache — Species the maximum bitmap cache number.
This impacts the memory usage of an RDP session.
DefaultColor — Species auto (0), 16-bit (1), and 32-bit (2)
options.
EnableNLA — Default is yes. Yes/no option to utilize the Network
Level Authentication feature in RDP 7.
ForceSpan — Default is no. Yes/no option to disable RDP Multi
Monitor feature.
EnableTSMM — Default is yes . Yes/no option to enable RDP7
Multi-media redirect.
EnableGFX —The option when set to yes, enables RDP8 Pipelined
Graphics feature. Default is yes for all platforms other than Wyse
3010 thin client with ThinOS (T10). If this option is congured as
no, the option EnableVOR and option EnableRdpH264 will be
internally set to no despite of the settings in INI.
EnableVOR — Default is yes. H.264. Yes/no option to enable
RDP8 Video Optimized Redirect.
NOTE: The EnableVOR parameter is not supported on C
or V class.
EnableRdpH264— Default is yes. This option enables RDP8.1 h.
264 graphics feature. This option is internally set to no if the option
EnableGFX is set to no manually or by default.
EnableRecord — Default is yes . Yes/no option to enable RDP
feature of recording from local.
EnableRFX — Default is yes. Yes/no option to enable Bitmap
Codec RemoteFX.
USBRedirection — Default is TCX . Option to select the channel
of USB devices redirection.
RDPScreenAlign4 — Default is no. RDPScreenAlign4=yes can
force RDP session width to 4 pixels aligned.
Parameters for wnos INI, {username} INI, and $MAC INI
les 87