Administrator Guide
Each entry with optional port number is specied as Name-or-IP: port, where: port is optional. If not specied, port 80 is used.
Locations can be supplied through user proles if user proles are used. The Time Servers provide the zero client time based on
the settings of time zone and daylight saving information. If DHCP is used, locations can be supplied through DHCP.
f Change Date and Time — Allows you to change date and time for secure environments requiring a solution to outside server
access. When connecting to a le server over HTTPS, the proper time must be dened on the zero client for SSL/ certication
validation.
Setting the Custom Information
Use the Custom Info tab to enter conguration strings used by WDM software. The conguration strings can contain information about
the location, user, administrator, and so on.
To congure the Custom Information:
1 From the oating bar menu, click the System Setup , and then click System Preferences.
The System preferences dialog box is displayed.
Figure 108. Custom info
2 Click the Custom Info tab to enter conguration strings for use by WDM software. The conguration strings can contain information
about the location, user, administrator, and so on. Clicking OK transfers the custom eld information you enter in the dialog box to the
Windows registry. The information is then available to the WDM Client Manager. For more information on using Custom Fields and
using WDM for remote administration and upgrading zero client software, see the WDM documentation.
3 Click OK to save the settings.
Conguring the Display Settings
Use the Display dialog box to select the resolution and refresh rate for the monitor used with the zero client.
Use the following options to congure the Display Settings:
• Conguring the General Display Settings
Conguring
Zero Client Settings 121