Administrator Guide

Parameter Description
The length of the lename, including the trailing period and the le
extension, is limited to 64 characters. This is required when conguring
the Citrix Secure Gateway PNAgent Interface (PNAgent/Lite servers) in
the Network Setup dialog box.
Adding certicates are required if the user CSG environments use
certicate agents that are not covered by the built-in certicates. The
certicates are used to validate server identities by your zero client.
Supported les include .crt le on ICA CSG; .cer and .pfx in 802.1x.
password and Password-enc are used for .pfx les.
AddCerticate=client cert.pfx
password=passpass
The Caradigm Vault server uses the certicate to validate the connection
between the Tap Server and the zero client. Use this INI parameter
certicate to Zero Client.
AdminMode={yes, no}
[admin-username=<encrypted_username>]
[admin-password=<encrypted_password>]
[Username=<username>]
[Password=<password>]
[ShowAdmin]={yes, no}
[Enc-username=encrypted_username]
[Enc-password=encrypted_password]
[ShowAESButton={yes, no}]
Default is no.
AdminMode — Yes/no option to use the username and the password to
obtain a high privilege zero client conguration when the Privilege
parameter level is set to high (Privilege=high).
admin-username — Species if admin-username=encrypted_username,
then encrypted strings are used for admin-username, no minimum length;
maximum length is 30 characters—15 characters convert to 30
characters encrypted.
admin-password — Species if admin-password=encrypted_password,
then encrypted strings are used for admin-password, no minimum length;
maximum length is 30 characters—15 characters convert to 30
characters encrypted.
Enc-username — Species if the username is encrypted, and encrypted
strings are used for the Enc-username.
Enc-password — Species if the password is encrypted, and encrypted
strings are used for the Enc-password.
IMPORTANT:
• Enc-password — Species if the password is encrypted, and
encrypted strings are used for the Enc-password.
• password — Species the password, no minimum length;
maximum length is 15 characters.
ShowAESButton=yes—In this option AES Encrypt button populates in
System Admin, when user enters the administrator mode. Click AES
Encrypt to launch encrypted generator to generate enc-password for INI
settings. You can hide AES Encrypt if ShowAESButton=no. If Enc-
Username and Enc-Password is presented, the default value is yes.
Otherwise, the default value is no.
AutoLoad=[0, 1, 2, 101, 102, 201, 202]
[LoadPkg={0, 1, 2}]
[AddPkg={pkg1_name, pkg2_name, …}]
[DelPkg={pkg1_name, pkg2_name, …}]
[VerifySignature={yes,no}]
[UpgradeOrder=(bios,wtos)]
Default is 1.
Species the rmware update mode.
0 — Disable checking for image.
1 — (Default) Enable a forced rmware upgrade/downgrade process.
2 — Enable a comparison/non-forced upgrade only process.
101 — Enable rmware upgrade/downgrade process, but have a popup
message that identies the rmware version, and then prompts with OK
and Cancel buttons appearing before the process; completion message
appears after process.
178 Creating and Using xen.ini Files