Administrator Guide

NOTE:

– The option to dene a wireless connection is not available on zero clients without a WLAN module.

– To exit the Attach the Ethernet cable screen, and load the ThinOS Lite system desktop, click Exit.

Figure 5. Ethernet cable

After the connection is established, the zero client validates the IP address from DHCP. If the DHCP contains the le server or Wyse

Device Manager or Wyse Management Suite congurations, then the ThinOS Lite system desktop is loaded. If the DHCP validation

fails, or the network connection fails, then the Management Conguration screen is displayed. Follow the steps 6-9.

5 Click Next to enter the Management Conguration setup.

6 On the Management Conguration screen, congure the following:

Getting started