Administrator Guide
Parameter Description
When HTTPS is congured to verify client certicate, one window pops
up for the user to select the client certicate.
If only one client certicate is available, set AutoSelectSingleCert=yes
will not prompt the window and automatically select the client certicate.
AutoSigno={yes, no, 2-60} AutoSigno —This option can be used to automatically sign-o a user
when the last opened session is closed. The default value is no. A value
ranging from 2 to 60 can be congured. This value represents the number
of seconds a session must be active prior to calling AutoSignO.
BootpDisable={no, yes} Default is no.
Yes/no option to support both DHCP and BOOTP to obtain the network
congurations. In the rst two tries, only DHCP is requested. Then, both
DHCP and BOOTP are requested.
For some environments, BOOTP requests will delay obtaining the IP from
the DHCP server. Set BootpDisable=yes will only perform a DHCP
request. This setting is only valid after the next reboot.
BootOrder={PXE, HardDisk, USB} Not supported on ThinOS Lite 2.
BootOrder — Sets the boot order for the BIOS. [Intro build 1.5.0_02] The
boot order must follow these rules:
1 The boot order is a list of these three options separated by a semi-
colon (;)or a comma (,).
2 Every option must be used.
3 The options must be dierent.
For example, the following settings are valid:
BootOrder=PXE;HardDisk;USB
BootOrder=HardDisk;PXE;USB
BootOrder=USB;PXE;HardDisk
However, the following settings are invalid:
BootOrder=PXE;HardDisk
BootOrder=PXE;PXE;USB
BootOrder=PXE;HardDisk;USB;PXE
If the rst boot order is not Hard Disk, the system restart will boot
from the BIOS setting.
CaradigmServer=vip list
[EGPGroup=group name]
[EnableLogO={yes,no}]
[SecurityMode={default, full, warning, low}]
[DisableManualLogon=yes/no]
CaradigmServer=vip list contains a list of VIP addresses with optional
TCP port number of Caradigm servers. EGPGroup denes the user group
name. If EnableLogO=yes is specied, the user is logged o from the
session before system signs o. Otherwise the session is disconnected.
The logged o user has a timeout value which can be set using
SessionCong parameter SessionLogOTimeout. The default timeout
value is 1, if no SessionLogOTimeout is specied.
SecurityMode species the SSL certication validation policy.If set to
default, it applies the SecurityPolicy setting.If set to full, the SSL
connection needs to verify server certicate. If it is untrusted, drop the
connection.If set to warning, the SSL connection needs to verify server
certicate. If it is untrusted, it is up to you to continue or drop the
connection. If set to low, the server certicate is not checked. The value
is persistent, the default value of the setting is default.
DisableManualLogon=yes disables the manually entry of credentials to
authenticate into the device. It only allows an already enrolled proximity
180 Creating and Using xen.ini Files