Administrator Guide
Parameter Description
DisableWlan—Used to disable wireless. If DisableWlan=EnetUp, and the
ethernet is on while booting, the wireless connection is disabled.
For example,
Device=Wireless Mode=Infrastructure SSID=ThinIsInIEEE8021X=yes
network=wireless prole=ThinIsIn access=WPA2-ENT eap=yes
eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2
Device=Wireless Mode=Infrastructure SSID=ThinOS Lite_95
roamsensitive=highIEEE8021X=yes network=wireless prole=ThinOS
Lite_95 access=WPA2-ENT eap=yes eaptype=EAP-PEAP peapeap=EAP-
MSCHAPV2
Device=Wireless Mode=Infrastructure SSID=ThinOS
Lite_11nIEEE8021X=yes network=wireless prole=ThinOS Lite_11n
access=WPA2-PSK wpa2pskpwd=2wsx3edc
Device=Wireless Priority="ThinOS Lite_11n,ThinOS Lite_95,ThinIsIn"
DEVICE_SECURITY=white_list/black_list
vid_pid=[vvvv,pppp]
class=name/[cc,ss,pp]
• When DEVICE_SECURITY=white_list is set, the security is in high
level, and you need to add all the devices (on board devices including
T10D's netcard, and internal hub) to the list that you want to use, and
all other devices are denied when the device is plugged-in.
• When DEVICE_SECURITY=black_list is set, the security is mid-level,
and customer can add the device which is not present in the list.
• About key value: all the value are hex, and vid_pid = 0xvvvvpppp,
class value is =0xccsspp; where
– vvvv=device vendor id
– pppp=device product id
– cc= device interface class
– ss=device interface subclass
– pp=device interface protocol
• Class name is abbreviation for the dened class. Valid names are listed
below: {Audio, CDC_control, HID, Pysical, Image, MASS_STORAGE,
Hub, CDC_Data, Smart_Card, Content_Security, Video,
Personal_Healthcare, AudioVideo, Billboard, Diagnostic_Device,
Wireless, Miscellaneous, Application, VendorSpecic}. For detailed
information, refer: www.usb.org/developers/dened_class
• The max number of devices/class table is 16.
Example:
DEVICE_SECURITY=white_list class=HID class=Audio class=Video
DEVICE_SECURITY=black_list vid_pid=0x0B0E2000 class=0x030101
DisableDomain={
no, yes}
Default is no.
Yes/no option to disable the drop-down domain list in the PNAgent/
PNLite Sign-on dialog box.
DNSIPVersion={ipv4, ipv6}
[DNSServer=<server_list>]
[DNSDomain=<dns_domain_url>]
[Combined={yes,no}]
Default is ipv4.
Species the DNS server and domain. Default IP version is ipv4. [Intro
build 1.7_122]
The DNSServer is an IP list separated by ";" or ",", max size of this list is
190 Creating and Using xen.ini Files