Administrator Guide

Parameter Description
needs to verify server certicate. If it is untrusted, drop the connection.If
set to warning, the SSL connection needs to verify server certicate. If it
is untrusted, it is up to you to continue or drop the connection.If set to
low, the server certicate is not checked. The value is persistent, and the
default value of the setting is default. If the settings are factory default or
if you are upgrading to ThinOS Lite 2.3 for the rst time, the value is
temporarily set to low. After loading any INI, it goes to Default.
RapportServer=<server_list>
[Retry=<retry number value>]
IMPORTANT: DISCONTINUED. DO NOT USE. Use
WDMService parameter.
Reboot={no, yes} Time=hh:mm
[-hh:mm]
[Wday={Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday}]
[Idle=minutes]
[Week={Current, Other, 0, 1, 2, 3, 4}]
Default is no.
Reboot — Yes/no option to enable automatic daily reboot of all ThinOS
Lite devices.
Time — Species the time to reboot and must be in a 24-hour format.
For example: Reboot=Yes Time=17:30 will reboot all ThinOS Lite devices
at 5:30 P.M. daily.
The option Wday species the weekday of scheduled reboot
The option Week species the minimum weeks required to reboot the
client after conguring an INI parameter. The value Current is equal to 0
and the value Other is equal to 1.
Idle—Species the idle minutes. Once the scheduled reboot time is
reached, the system reboots if there is no active session or the terminal is
idle for the specied idle minutes. If the session is still active, the reboot is
delayed till the idle time is reached or log o the sessions.
For example,
If you set Reboot=yes time=20:30, the unit reboots on local time 20:30. If
you set Reboot=yes time=20:30-4:30, the unit reboots on random time
through 20:30 to 4:30.
If you set Reboot=yes time=23:00 Wday=Friday,Monday, the unit reboots
on local time 23:00 of Friday and Monday.
If you set Reboot=yes time=1:00 Idle=10, the unit reboots on 1:00, if there
are no sessions. If there is any active session, the reboot happens only if
the unit is idle for 10 minutes or the system logs out from the session.
If you set Reboot=yes time=1:45 Wday=Sunday Week=1, the unit will
reboot at 1:45 on a Sunday only after 1 week of setting the INI parameter.
Reconnect={
no, yes, seconds} Default is no.
Yes/no option to enable automatic reconnection to an application after a
server disconnection. This setting in a xen.ini le will be saved into
NVRAM if EnableLocal=yes is set in the xen.ini le.
The value of seconds is the interval to wait before automatically restarting
the connection after disconnect.
If the value is negative, it will reconnect only during startup Valid range of
the absolute value is 1 to 3600. If the absolute value is over 3600, it is set
to 20.
Resolution=[DDC, 640X480, 800X600,
1024X768, 1152X864, 1280X720,
Default is DDC.
Resolution — Species the local display resolution. Option DDC can be
specied to select default display resolution.
Creating and Using xen.ini Files 213