Administrator Guide
Parameter Description
[Sleep={0-180}] LockTerminal— This is an optional parameter and species to put the
thin client in LOCK state when the screen saver is activated. Default is 0.
0 — Disabled.
1 — Puts the thin client in a LOCK state when the screen saver is
activated. The wallpaper is shown and the user is prompted with an
unlock dialog box to enter the sign-on password to unlock the thin client.
LockTerminal settings are saved into NVRAM if LockTerminal=1and
EnableLocal=yes is set in the xen.ini le.
2— Puts the thin client in a LOCK state when the screen saver is
activated, however, the wall paper cannot be viewed when the user is
prompted with an unlock dialog box to enter the sign-on password to
unlock the thin client.
3— Puts the thin client in a LOCK state when the screen saver is
activated, and the username and password are needed to unlock the
terminal. The wallpaper is not shown and the Password eld in the
Unlocking window is invisible until you have entered the username.
When you click OK or press the Return key, a message box pops up to
input the username and password to unlock the terminal.
NOTE:
The user must be signed on with a password for a Lock action to
take eect. If set in KeySequence, users can lock the thin client at
any time by pressing Ctrl+Alt+Left arrow or Ctrl+Alt+Right arrow.
Unit — This parameter converts the screen saver timer value from
minutes to hours to set longer time.
Type — Species which type of screensaver to use.
0 — Blank the Screen
1 — Flying Bubbles
2 — Moving Image
3 — Showing Pictures
4 — Playing Video
VideoLink — Species the video link address of the video le. Links with
only http are supported. The mp4 video format is supported.
VideoSpan — Species the video displayed mode in the screen. If the
dual head is in span mode and VideoSpan=yes, it is spanned across all the
screens. If VideoSpan=no, it is displayed in the main screen.
Imagele — This is an optional parameter and species an image le
residing in the bitmap sub-folder under the home folder to be used as a
Moving Image screensaver.
If Type is set to 2 and no image le is present then the default Dell Wyse
logo is used.
If Type is set to 3, pictures residing in picture subfolder under the home
folder are displayed.
Creating and Using xen.ini Files
215