Administrator Guide

Parameter Description
[WyseVDAServerPort=serverPort]
[FontSmoothing={yes, no}]
[AutoConnect={yes, no}]
[MultiMonitor={yes, no}]
[EnableImprivataVC={yes,no}]
[Locale=LocaleID]
[SessionLogoTimeout=seconds]
[GroupSession={yes,no}]
The options VUSB_DISKS, VUSB_AUDIO, VUSB_VIDEO,
VUSB_PRINTER are specied, if these USB devices are redirected to the
server using TCX Virtual USB or ICA USB redirection when USB
redirection is enabled.By default, these devices are handled as local
devices.
For example, If you want to use USB disks as a network disk, you can set
“SessionCong=all mapdisks=yes VUSB_DISKS=no".
If you want to use USB disks as server side device which are displayed in
session device manager, you can set "SessionCong=all mapdisks=no
VUSB_DISKS=yes".
The option FullScreen species the default screen mode.
The option Resolution species the session resolution. It can be default or
vga_resolution, for example, 640 x 480, 1024 x 768 and so on. For more
information, refer to resolution in connection parameters.
Set DisableResetVM=yes to disable the Reset VM function. By default,
this function is controlled by server side including Citrix PNA.
Set FontSmoothing=no to disable font smoothing option. By default, font
smoothing is allowed.
Set AutoConnect=no to disable auto connection function.
Set MultiMonitor=no to disable multiple monitor layout function. The
session has the same desktop width and height with local virtual desktop
size, spanning across multiple monitors, if necessary.
If EnableImprivataVC is set to no, the Imprivata Virtual Channel is
disabled. The user can use vusb redirect instead of Imprivata Virtual
Channel mode to use the Rdeas or nger print device in session as
server side remote device.
Set Locale=LocaleID to set Locale in session to make some localization
conguration to work. )
Set SessionLogoTimeout to force all sessions to logo after you sign-o
from the broker. It only supports Citrix Xen brokers. Without this INI, all
sessions are simply disconnected after you sign-o from the broker. The
default value is 0. So when you log o from the broker, we used to
disconnect all active sessions. Now the system will also force those
sessions to be logged o, so that next time you can have a clean session.
From this release, when this INI value is not 0, for example 30, and when
you sign o from broker with active sessions, client sends sign-o
command to active sessions instead of asking disconnect, and client waits
for 30 seconds, if all active sessions successfully log o within 30
seconds, for example nish by 20 seconds, system will sign out users
from broker immediately after that. If any active sessions fail to log o
within 30 seconds, system will close the session and sign out users from
broker immediately. During the awaiting time, system will prompt user a
message to ask them to check and save all work to make the session log
o smoothly.
Set GroupSession=yes to enable the function of grouping sessions and
the menu item of Group Sessions is checked when you right click on the
desktop. The default value is no and the original state of Group Sessions
is unchecked.
**SessionCong=ICA
[desktopmode={fullscreen, window}]
SessionCong — Species the ICA default settings of the optional
connection parameters for all ICA sessions.
218 Creating and Using xen.ini Files