Administrator Guide

Conguring the Wyse Device Agent settings
Use this tab to congure the Wyse Device Manager (WDA) and Wyse Management Suite settings.
ThinOS Lite supports all the Wyse Management Suite Group Policy settings. To congure the Wyse Management Suite settings, do the
following:
1 From the desktop menu, click System Setup, and then click Central Conguration.
The Central Conguration dialog box is displayed.
2 Click WDA > WMS, and use the following guidelines:
Figure 42. Central
conguration
By default, the WMS option is selected. Wyse Management Suite service automatically runs after the client boot up.
If the rst discovery, for example, the Wyse Management Suite service is not successful, it seeks for the next priority, for example,
WDM service. This continues until a discovery is successful. If all discoveries fail, it is started again automatically after a xed time—24
hours.
a Enable Wyse Management Suite (WMS)—Select the check box to enable the Wyse Management Suite to discover your thin
client.
b DNS SRV record—Select this check box if you want the thin client to obtain the Wyse Management Suite values through DNS
server, and then try to register into the Wyse Management Suite server. By default, the check box is selected. If the check box
selection is canceled, the thin client cannot obtain the Wyse Management Suite values through DNS server.
To create DNS records in DNS server, use the following information:
# WMS server URL
DNS Record Type: DNS SRV
Conguring
the connectivity 67