Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
SecurityMode specifies the SSL certification validation policy.
If set to default, it applies SecurityPolicy setting. If set to full,
the SSL connection needs to verify server certificate. If it is
untrusted, drop the connection. If set to warning, the SSL
connection needs to verify server certificate. If it is untrusted,
it is up to you to continue or drop the connection. If set
to low, the server certificate is not checked. The value is
persistent, and the default value of the setting is default.
From ThinOS version 8.3_109, ThinOS supports OneSign 5.2
RDSH broker.
Set AutoAccess=RDSHD or RDSHA to automatically launch
Microsoft type broker.
Set RDSHPC to automatically launch RDP session without
broker.
PasswordServer=password_server
[AccountSelfService={yes, no}]
[connect={ica, rdp}]
[encryption={Basic, 40, 56, 128,
Login-128, None}]
Specify an ica/rdp server that can be used to log on to modify
password when you sign-on with password timeout.
The PasswordServer statement can specify the connection
parameters as described in the Connect statement. If no
parameter is specified, it connects with ICA protocol.
AccountSelfService — Yes/no option to define the password
server as an Account Self Service server.
If AccountSelfService=yes follows PasswordServer, click the
icon on the signon window to do account self-service.
If Connect parameters do not follow AccountSelfService=yes,
this password server will be the account self-service server of
Citrix and clicking the icon will use Citrix protocol to unlock or
change password for an account.
If Connect parameters follow AccountSelfService=yes,
clicking the icon launches a session to change password for
an account.
PCoIP_Logging={yes, no}
[Broker_Logging_Level={0,1,2,3,4}]
[Session_Logging_Level={0,1,2,3,4}]
The option PCoIP_Logging can enable and disable the PCoIP
client logs output in Trouble Shooting. If you set the value to
yes, then it is same as selecting the Trouble Shooting Capture
Export PCoIP Log radio button to persistent and no to none.
The option Broker_Logging_level and Session_Logging_Level
accord to PCoIP broker log level and PCoIP session log
level. The default value is 0 which means critical log, 1 means
log severity error, 2 means log severity info, 3 means log
severity debug, and 4 means log severity unrestrained.
PlatformConfig=all
[EncryptFS=yes]
Encrypts local flash, specifically cached INI files and
credentials that are stored, if using signon=yes.
NOTE:
Event log will display new statements stating that
FileSystem encryption has been enabled.
PlatformConfig=”C/V/S/R/T Class”
[Firmware={Firmware filename}]
[BIOS={BIOS filename}]
[ECFirmware={EC filename}]
If a specific platform is specified by the PlatformConfig
parameter, then ThinOS will attempt to load the Firmware and
BIOS whose filenames are specified by the Firmware and BIOS
parameters.
If the written Firmware and BIOS are valid on file server, they
will be loaded by default; if the written Firmware and BIOS
are invalid on file server, ThinOS will load the platform default
Firmware and BIOS instead.
30 Parameters for wnos INI files only