Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
For example,
If you set Reboot=yes time=20:30, the unit reboots on local
time 20:30. If you set Reboot=yes time=20:30-4:30, the unit
reboots on random time through 20:30 to 4:30.
If you set Reboot=yes time=23:00 Wday=Friday,Monday, the
unit reboots on local time 23:00 of Friday and Monday.
If you set Reboot=yes time=1:00 Idle=10, the unit reboots on
1:00, if there are no sessions. If there is any active session, the
reboot happens only if the unit is idle for 10 minutes or the
system logs out from the session.
Since 8.3_012 or later, scheduling a shutdown at a given time
is supported. The options are same as schedule a reboot as
above.
For example, Set Shutdown=yes time=20:30, the unit shuts
down at local time 20:30.
RegisterWINS=yes Forces the thin client to register itself with a Microsoft WINS
server.
ScepAutoEnroll={yes, no}
AutoRenew={yes, no}
InstallCACert={yes, no}
[CountryName=country]
[State=state]
[Locality=locality]
[Organization=organization_name]
[OrganizationUnit=organization_unit]
[CommonName=common_name]
[Email=email_address]
KeyUsage=key_usage
KeyLength={1024, 2048, 4096 }
[subAltName=subject_alt_name_list]
RequestURL=scep_request_url
CACertHashType={MD5, SHA1}
CACertHash=CA_HASH_VALUE
[EnrollPwd=enrollment_password]
[EnrollPwdEnc=encrypted_enrollment_password]
[ScepAdminUrl=scep_administrator_page_url]
[ScepUser=scep_enrollment_user]
[ScepUserDomain=scep_enrollment_user_domain]
[ScepUserPwd=scep_enrollment_user_password]
[ScepUserPwdEnc=encrypted_scep_enrollment_user_passwo
rd]
This option is to allow client automatically get certificates and
renew certificates using SCEP protocol.
ScepAutoEnroll—Set this keyword to yes to enable client's
functionality to automatically obtain certificate.
Set AutoRenew—Set this keyword to yes to enable
certificate auto renew. Client only tries to renew certificates
requested either manually or automatically through SCEP
from this client, and the renewal is performed only after a
certificate's 1/2 valid period has passed.
Set InstallCACert—Set this keyword to yes to install the
root CA's certificate as trusted certificate after successfully
getting a client certificate.
CountryName, State, Locality, Organization,
OrganizationUnit, CommonName, Email—These keywords
together compose the subject identity of the requested client
certificate. Country Name should be two letter in uppercase,
other fields are printable strings with a length shorter than 64
bytes, and email_address should have a '@' in it. At least one
of the above fields must be configured correctly to form the
client certificate's subject identity.
KeyUsage —This option is to specify key usage of the
client certificate and should be set to a digitalSignature,
keyEncipherment or both using a ';' concatenating these two
as digitalSignature;keyEncipherment.
KeyLength—This option is to specify the key length of the
client certificate in bits, must one of the value in the list.
subAltName—This option is to specify the client certificate's
subject alternative names. It is a sequenced list of name
elements, and every element is either a DNS name or an IP
address. Use ';' as delimiter between them.
RequestURL—This option is to specify the SCEP server's
service URL. This field must be set correctly. Do not add any
protocol prefix before URL. Currently HTTP is used as the
only communication protocol for SCEP requests and security
is ensured by SCEP itself.
CACertHashType—This is the hash type used to verify
certificate authority's certificate.
Parameters for wnos INI files only
33