Setup Guide

Table 5. Connection Settings: wnos.ini files only (continued)
Parameter Description
FormURL=URL to a file
Specifies the URL to the name of a bitmap file (.ico, .bmp, .jpg, or .gif), to be
displayed in the sign-on window, residing under the thin client home directory.
The length of the path, including the home directory and the file, is limited to
128 characters. If auto dial-up is enabled, this statement is invalid.
HealthCastServer=vip list
[LogLevel={0, 1, 2 ,3}]
[SecurityMode={default, full, warning, low}]
[ClientCertificate=certificate file name]
Specifies a list of VIP addresses with optional TCP port number of HealthCast
servers.
LogLevel—The option LogLevel is for debug purpose; 0 means no log.
SecurityMode —Specifies the SSL certification validation policy. If set to
default, it will apply SecurityPolicy setting. If set to full, the SSL connection
needs to verify server certificate. If it is untrusted, then drop the connection.
If set to warning, the SSL connection needs to verify server certificate. If it
is untrusted, you may still continue or drop the connection. If set to low, the
server certificate will not be checked. The value will be persistent, and the
default value of the setting is default.
ClientCertificate —The option specifies the client certificate file name
during SSL connection between Healthcast server and client.
INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes to 480 minutes.If
the value given is bigger than 480, 480 is set instead. If the value given is
smaller than 0, 0 is set instead.
When the system idle is time out in the configured minutes, the system will
automatically sign off, reboot or shutdown which are based on the setting of
AutoSignoff.
NoSessionTimer— The parameter NoSessionTimer has the same range as
INACTIVE and it is valid only if INACTIVE value is not 0. If there is a session
use the value of Inactive, otherwise use the value of NoSessionTimer, if
NoSessionTimer is configured.
If AutoSignoff=yes Shutdown=yes is configured, then this statement can
work before signon.
If AutoSignoff=yes Reboot=yes is configured, this statement can work before
signon.
LockTimer—If the parameter LockTimer is set, the terminal is locked and the
system idle is timeout in the configured seconds; System will automatically
sign off, reboot or shutdown based on the setting of AutoSignoff.
LongApplicationName={no, yes}
Default is no.
Yes/no option to display all 38 characters in a desktop icon name. If
LongApplicationName=no, then icons will display up to 19 characters; any over
19 characters and the last three characters will be “…”.
MaxVNCD={0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.
Option to enable VNC shadowing. Default value is 0 means VNC shadowing is
disabled. Set to 1 to enable shadowing.
NOTE:
Only one VNC client session is allowed and a password is required.
See also VNCPrompt in Connection Settings: wnos.ini files, {username} INI,
and $MAC INI Files to enable a VNC shadowing prompt to a user.
See also VncPassword in Connection Settings: wnos.ini files only to specify a
string of up to 8 characters as the password used for shadowing.
VNCD_8bits — Default is yes. Yes/no option to force the VNC server to
send out images with 8-bits-per-pixel; if set to no, the VNC server will send
out images with the current system color depth.
26 Parameters for wnos INI files only