Setup Guide

Table 5. Connection Settings: wnos.ini files only (continued)
Parameter Description
VNCD_Zlib — Default is no. Yes/no option to allow the VNC server to send
data with Zlib compression.
MMRConfig={VIDEO}
[flashingHW={0, 1}]
This parameter specifies whether to show the “HW” label at the top left
corner of video or not when HDX is hardware decoded. The default value is 0.
Set flashingHW to 0, if you want to hide HW. Set flashingHW to 1, if you want
to show HW.
Multifarm={no, yes}
Default is no.
Yes/no option to support Citrix multifarm functionality for the wnos.ini files. If
Multifarm=yes, PNAgent/PNLite users are able to authenticate to more than
one Citrix farm.
MultiHead=[yes, no]
[ManualOverride={yes, no}]
[Mainscreen={1,2,3,4,5,6}]
[Resolution={ddc, width X height}]
[Rotate={left, right, flip}]
If you set ManualOverride=yes, the monitor layout can be set by the user
configuration if any, otherwise the configuration defined in INI are applied.
Mainscreen sets the required screen as the main screen.
Resolution and Rotate only take effect when it is set to mirror mode and
MultiHead=no.
Rotate=flip enables the user to flip the display 180 degrees to a landscape
display mode. Ensure that the current resolution is set to 0 degrees or 180
degrees.
MultiLogon={no, yes}
[SequentialDomain={yes, no}]
Default is no.
Yes/no option to support multiple log ons. If MultiLogon=yes, the PNAgent/
PNLite sign-on authenticating window can input a different username,
password, and domain while signing on to different PNAgent/PNLite servers.
For backward compatibility, the following format is supported:
MultiLogon=yes
PNAgentServer=10.1.1.30;10.2.2.60
The SelectServerList statement is also supported:
MultiLogon=yes
SelectServerList=pna \
description=store host=http://proper-storefront-url.ctx.com \
description="Floor 3" host=10.1.1.30 \
description="Floor 1" host=10.2.2.60 \
description="All Users" host=10.3.3.90
NOTE:
The SelectServerList takes precedence over PNAgentServer. The PNA
server description or name can be displayed on the signon window so
that the user knows which and what server is logging on. See also
SelectServerList={PNA, VDI} in Connection Settings: wnos.ini files.
If SequentialDomain=yes is specified, the domain configured in DomainList
statement is selected in order.
For example, set the following ini:
DomainList="xen;wyse" multilogon=yes sequentialdomain=yes
pnagentserver=10.151.134.23; https://csg-cn.wyse.com.
When you logon to the first server 10.151.134.23, the domain xen is selected.
Then logon to the second server https://csg-cn.wyse.com and the domain
wyse is selected.
Parameters for wnos INI files only
27