Administrator Guide

Figure 112. Peripherals—Keyboard
2. Click the Keyboard tab and set the Character Set, Keyboard Layout, Delay Before Repeat and Repeat Rate parameters. The
following table explains the parameters present on the Peripherals page.
Table 9. Parameters on the Peripheral page
Parameter Description
Character Set Specifies the character set. Each character is represented
by a number. The ASCII character set, for example, uses the
numbers 0 through 127 to represent all English characters
and special control characters. European ISO character sets
are similar to ASCII, but they contain additional characters
for European languages.
Keyboard Layout Presently the keyboard languages listed in the Keyboard
layout drop-down list are supported. The default value is
English (United States).
Delay Before Repeat Specifies the repeat parameters for held-down key. Select
the Delay before repeat value as either 1/5 second, 1/4
second, 1/3 second, 1/2 second, 3/4 second, 1 second,
2 seconds, or No Repeat. The default is 1/3 second.
Repeat Rate Select Slow, Normal, or Fast. The default value is Medium.
3. Click OK to save the settings.
Configuring the Mouse Settings
To configure the Mouse Settings:
1. From the floating bar Menu, click the System Setup , and then click Peripherals.
The Peripherals dialog box is displayed.
Configuring Zero Client Settings
119