Administrator Guide
Table Of Contents
- Dell Wyse ThinOS Lite Release 2.6 Administrator’s Guide
- Introduction
- Before working on ThinOS Lite
- Getting started
- Global connection settings
- Configuring the connectivity
- Configuring the network settings
- Configuring the remote connections
- Configuring the Citrix broker setup
- Configuring the visual settings
- Configuring the general options
- Configuring the authentication settings
- Configuring the central configurations
- Configuring the VPN manager
- Configuring the connection broker
- Configuring Citrix
- Configuring the Citrix broker setup
- Citrix HDX RealTime Multimedia Engine—RTME
- Citrix Icon refresh
- Using multiple audio in Citrix session
- Using Citrix NetScaler with CensorNet MFA authentication
- Okta Integration through Citrix NetScaler
- Configuring ICA connections
- ICA Self Service Password Reset—SSPR
- QUMU or ICA Multimedia URL Redirection
- HTML5 Video Redirection
- ICA SuperCodec
- Anonymous logon
- Configuring the Citrix UPD Printer
- Introduction to Flash Redirection
- Configuring Citrix
- Configuring Zero Client Settings
- Performing Diagnostics
- BIOS Management
- Security Changes
- Creating and Using xen.ini Files
- Examples of Common Printing Configurations
- Important Notes
- Troubleshooting
Figure 120. LPDs
2. Click LPDs tab and use the following guidelines when printing to a non-Windows network printer:
NOTE: Be sure to check with your vendor that the printer can accept Line Printer Request print requests.
a. Select LPD—Select the port you want from the list.
b. Printer Name —(Required) Enter name you want displayed in your list of printers.
c. Printer Identification—Enter the type or model of the printer in the exact text of the Windows printer driver name—
including capitalizations and spaces.
This name must be either the device driver name for the printer under the Microsoft Windows system, or a key to map
to the device driver. If not specified, the name will be defaulted to the printer-supplied identification for standard direct-
connected USB printers or Generic / Text for non-USB connected printers upon connection to Windows hosts. The
driver name mapping takes place either through a printer-mapping file read by the system as part of the global profile
(wnos.ini) or by MetaFrame servers through the MetaFrame printer configuration file (\winnt\system32\wtsprnt.inf).
d. LPD Hosts—The DNS or WINS name of the server for the network printer. An IP address of the printer on the network
can also be entered.
If the printer is attached to another zero client on your network, the entry in the LPD Hosts box is the name or address
of that zero client.
e. LPD Queue Name — An LPD host maintains a named queue for each supported printer. Enter the name of the queue
associated with the printer to be used.
This name can be different for each vendor. This field is required and must be correct so that the network printer
accepts incoming print jobs properly. For example, auto can be used for HP LaserJet 4200n PCL6 as per documentation
found on the HP Web site.
NOTE:
If the printer is attached to another zero client on your network, the LPD Queue Name must match the
content of the Printer Name box on the zero client with the printer attached.
f. Printer Class — (Optional) Select the printer class from the list.
g. Enable the printer device — Must be selected to enable the printer. It enables the device so it displays on the remote
host.
3. Click OK to save the settings.
128
Configuring Zero Client Settings