Administrator Guide

Table 22. Parameters for a xen.ini File (continued)
Parameter Description
After the user sets this, the user needs set option in Trouble
shooting to start tracing the USB device data.
Device=Rfideas
[DisableBeep={yes,no}]
[DisableKeyStroke={yes,no}]
[SetCardType={yes,
no} Configuration1={*}
Configuration2={*}]
[DisableInitialization={yes,no}]
[DisableLed={yes,no}]
Device=Rfideas — Specifies the local Rfideas readers.
DisableBeep — Default is yes. Option disables the beep sound when
the card is read.
DisableKeyStroke — Default is yes. Option disables the keyboard
movements and key strokes.
SetCardType — Default is no. Used only for pcProx Plug readers.
If set to yes, then the Configuration #1 initializes to HID Prox
608x compatibility and Configuration #2 initializes to RDR-758x
Equivalent.
If set to no, then the card type remains unchanged.
DisableInitialization — Default is no. Option disables configurations
to the card reader.
Device=mtouch
[mult_touch={yes, no}]
[mult_jitter={5-50}]
This parameter specifies the ThinOS multi-touch Monitor setting.
For mult-touch, if the value is set as yes, multi-touch is supported.
If the values is set as no, multi touch is not supported. The default
value is yes.
For mult-jitter, choose larger value if you prefer single click.
Choose smaller value to have better user experience. The default
value is 30.
DHCPOptionsRemap={yes, no}
[DisableOption12={yes, no}]
[FileServer={128-254}]
[RootPath={128-254}]
[FtpUserName={128-254}]
[FtpPassWord={128-254}]
[RapportServer={128-254}]
[RapportPort={128-254}]
[WDMServer={128-254}]
[WDMPort={128-254}]
[PnliteServer={128-254}]
[DomainList={128 -254}]
[VDIBroker={128-254}]
[RapportSecurePort={128-254}]
[Discover={
yes, no}]
[WDMSecurePort={128-254}]
[WDMFQDN={128-254}]
[CCMGroupKey={128-254}]
[CCMServer={128-254}]
[CCMMQTTServer={128-254}]
[CCMCAValidation={128-254}]
Default is no.
DHCPOptionsRemap — Specifies whether or not the following
options can be set.
The value for each option must be from 128 to 254. Values for the
options must be different for each option. These options are used
to configure DHCP server tags for zero client booting.
The option DisableOption12 sets if the option tag 12 in DHCP is
accepted or not. As default, DHCP option 12 sets the hostname
and domain name of the terminal. For example, the information of
option 12 is terminal name.wyse.com, the terminal name will be set
as terminalname and the domain name will be set as wyse.com.
If you set different value for DisableOption12 from the value in
NVRAM, the system will automatically reboot to make the value
valid. (CIR36891)
RapportSecurePort— Specifies the HTTPS port of WDM server.
It is in 6.3 to support WDM4.7.
Discover—If Discover=yes, the device fetches Wyse DHCP options
from DHCP server, otherwise, it prevents the device from fetching
those information. Default value is yes. If the device receives
FileServer/WDMServer information through the DHCP server, then
the associate User interface is protected.
NOTE:
WDMSecurePort is the specified HTTPS port of the WDM
server.
WDMSecurePort—Specifies the HTTPS port of WDM server.
WDMFQDN — Specifies the Fully Qualified Domain Name (FQDN)
of the WDM server.
Creating and Using xen.ini Files
175