Administrator Guide

Table 22. Parameters for a xen.ini File (continued)
Parameter Description
Device=Wireless Mode=Infrastructure SSID=ThinOS
Lite_95 roamsensitive=highIEEE8021X=yes network=wireless
profile=ThinOS Lite_95 access=WPA2-ENT eap=yes eaptype=EAP-
PEAP peapeap=EAP-MSCHAPV2
Device=Wireless Mode=Infrastructure SSID=ThinOS
Lite_11nIEEE8021X=yes network=wireless profile=ThinOS Lite_11n
access=WPA2-PSK wpa2pskpwd=2wsx3edc
Device=Wireless Priority="ThinOS Lite_11n,ThinOS Lite_95,ThinIsIn"
DEVICE_SECURITY=white_list/black_list
vid_pid=[vvvv,pppp]
class=name/[cc,ss,pp]
● When DEVICE_SECURITY=white_list is set, the security is in
high level, and you need to add all the devices (on board devices
including T10D's netcard, and internal hub) to the list that you
want to use, and all other devices are denied when the device is
plugged-in.
● When DEVICE_SECURITY=black_list is set, the security is mid-
level, and customer can add the device which is not present in
the list.
● About key value: all the value are hex, and vid_pid =
0xvvvvpppp, class value is =0xccsspp; where
○ vvvv=device vendor id
○ pppp=device product id
○ cc= device interface class
○ ss=device interface subclass
○ pp=device interface protocol
● Class name is abbreviation for the defined
class. Valid names are listed below: {Audio,
CDC_control, HID, Pysical, Image, MASS_STORAGE,
Hub, CDC_Data, Smart_Card, Content_Security, Video,
Personal_Healthcare, AudioVideo, Billboard, Diagnostic_Device,
Wireless, Miscellaneous, Application, VendorSpecific}.
● The max number of devices/class table is 16.
Example:
DEVICE_SECURITY=white_list class=HID class=Audio
class=Video
DEVICE_SECURITY=black_list vid_pid=0x0B0E2000
class=0x030101
DisableDomain={
no, yes}
Default is no.
Yes/no option to disable the drop-down domain list in the
PNAgent/ PNLite Sign-on dialog box.
DNSIPVersion={ipv4, ipv6}
[DNSServer=<server_list>]
[DNSDomain=<dns_domain_url>]
[Combined={yes,no}]
Default is ipv4.
Specifies the DNS server and domain. Default IP version is ipv4.
[Intro build 1.7_122]
The DNSServer is an IP list separated by ";" or ",", max size of this
list is
If you set Combined=yes, the DNS server will combine the DNS
server configured by DHCP and the static one. The DNS domain will
use the value configured by DHCP in case the static DNS domain is
empty.
178 Creating and Using xen.ini Files