Administrator Guide

Table 22. Parameters for a xen.ini File (continued)
Parameter Description
[DisableGuest={no, yes}]
[DisablePassword={no, yes}]
[LastUserName={
no, yes}]
[RequireSmartCard={no, yes}]
[SCRemovalBehavior= {-1, 0, 1}]
[SaveLastDomainUser={yes, no, user, domain}]
[DefaultINI=filename]
[IconGroupStyle={default, folder}]
[IconGroupLayout={
Vertical, Horizontal}]
[PasswordVariables={yes,
no}
[LockTerminal={yes, no}]
[ExpireTime={0, 1 - 480}]
[UnlockRefresh={yes, no}]
[SCShowCNName={yes,no}]
[SCSecurePINEntry={no, yes}]
[AutoConnectTimeout={10-300}]
[DisableEditDomain={yes, no}]
[AdGroupPrefix=adgrpnameprefix]
[RequireSmartCard ={yes or force,
optional, no}]
[CitrixSignonStyle={default, xenith, thinos}]
[SignonStatusColor=“rrr ggg bbb”]
The optional keyword MaxConnect sets the maximum number
of connects that are allowed to be specified in the xen.ini and
username.ini together. The range allowed for the “max” is 100 to
2000. If the value is greater than 2000, 2000 is set instead. If the
value is lesser than 100, 100 is set instead.
The default maximum value is 216 entries. (CIR37285)
The optional keyword ConnectionManager sets the state of
connection manager while sign on (After 5.0.006).
The following optional keywords are valid after 5.0.010.
The optional keyword EnableOK is set to display OK and Cancel
button in sign-on window
The optional keyword AutoConnectTimeout sets the timeout for
auto connect published applications. The range is 10 seconds to 300
seconds. The default is 30 seconds
The optional keyword DisableGuest sets whether guest sign-on is
disabled or not.
The optional keyword DisablePassword is set to disable password
box and new password check box in sign-on window.
The optional keyword LastUserName is set to display the last sign-
on username after the user logs off.
The optional keyword RequireSmartCard is set to enable force logon
with smartcard
The optional keyword SaveLastDomainUser is set to save the
username and domain into NVRAM, after successful sign on. So
during the next reboot, the username and domain saved in the
NVRAM is displayed in sign on server as default username and
domain, if no Default User is set in xen.ini.
The size of domain\username is limited to 32. If input
domain\username size is greater than 32, it will be truncated and
then saved into NVRAM.
If SaveLastDomainUser=user, only username is saved into NVRAM.
If SaveLastDomainUser=domain, only domain name is saved into
NVRAM. (CIR57726)
The optional keyword SCRemovalBehavior configures the behaviors
after the smart card is plugged out from the terminal.
SCRemovalBehavior — Default is 0. Specifies what happens after
a smart card is removed.
-1 — If smartcard is removed then client has no action. Whether
the session can be used or not, totally depends on the server policy.
0 — System logs off.
1 — System locks and can be unlocked only when the same
certificate is used with the smart card.
The optional keyword DefaultINI configures a file name which is in
default folder of username ini files.
If the {username}.ini is not found, this file will be loaded by default.
(CIR51869)
The optional keyword IconGroupStyle configures the icon group
style on the desktop. PNAgent published applications can be
configured with client folder in PNA server.
Creating and Using xen.ini Files
209