Administrator Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.5 Hotfix Administrator’s Guide
- Introduction
- Getting started
- Configuring ThinOS using the First Boot Wizard
- Connecting to a remote server
- Using your desktop
- Configuring thin client settings and connection settings
- Connecting to a printer
- Connecting to a monitor
- Locking the thin client
- Signing off and shutting down
- Additional getting started details
- Classic desktop features
- Login dialog box features
- Accessing system information
- Global Connection settings
- Configuring the connectivity
- Configuring the network settings
- Configuring the remote connections
- Configuring the central configurations
- Configuring the VPN Manager
- Configuring the connection brokers
- Configuring Citrix
- Configuring the Citrix broker connection
- Citrix HDX RealTime Multimedia Engine or RealTime Optimization Pack
- Citrix Cloud services
- Citrix icon refresh
- Using multiple audio in Citrix session
- Using Citrix NetScaler with CensorNet MFA authentication
- Configuring ICA connections
- ICA Self Service Password Reset
- QUMU or ICA Multimedia URL Redirection
- HTML5 Video Redirection
- ICA SuperCodec
- Anonymous logon
- Configuring the Citrix UPD printer
- Introduction to Flash Redirection
- Configuring VMware
- Configuring Microsoft Remote Desktop
- Configuring Dell vWorkspace
- Configuring Amazon Web Services or WorkSpaces
- Configuring Citrix
- Configuring thin client settings
- TCX Suite
- Performing diagnostics
- BIOS management on ThinOS
- Security
- Automating updates and settings using central configuration
- Examples of common printing configurations
- Important notes
- Troubleshooting
- Firmware upgrade
- Frequently asked questions
Using the Printer Setup dialog box for configuring LPD services
From the Classic desktop mode only, a thin client can be configured to provide LPD (Line Printer Daemon) services making the
thin client a printer server on the network. Set up the thin client that is to provide LPD print services as follows:
To configure LPD services using the Printer Setup dialog box.
1. From the desktop menu, click System Setup > Network Setup to open the Network Setup dialog box.
2. Enter a static IP address for the thin client.
3. From the desktop menu, click System Setup > Printer to open the Printer Setup dialog box and select any of the listed
ports.
4. Select a LPT.
5. Name the printer in the Printer Name box.
6. Enter the Printer Identification type or model of the printer in the exact text of the Windows printer driver name —
including capitalizations and spaces. In our example case, enter HP LaserJet 4000 Series PCL.
7. You can leave Printer Class as default.
8. Select Enable the Printer Device.
9. Select Enable LPD service for the printer.
10. For setting up Windows 2003/2008 servers, see Setting up Windows 2003/2008 servers.
Setting up Windows servers
To configure setting the Windows 2003/2008 servers
1. Navigate to Control Panel > Administrative Tools > Services and ensure the Microsoft TCP/IP Printing service is
installed. If it is not, install it using the Microsoft installation instructions.
2. Add the thin client as the LPD printer by completing the following:
a. Navigate to Control Panel > Printers > Add Printers > Local Printer > Create a new port and select LPR PORT.
NOTE: If you do not see LPR Port, ensure that the Microsoft TCP/IP Printing service is installed correctly.
b. Type the thin client IP address or DNS name in the Name or address of host providing LPD box.
c. Type the printer name assigned in Using the Printer Setup dialog box for configuring LPD services in the Name of
printer on that machine box.
d. Click OK, and then click NEXT.
3. After you have selected the printer, you can perform your normal printer setup for the application server. For example, select
the manufacturer printer type and printer name.
Using INI parameters for configuring LPD services
Configuring LPD printing using ThinOS INI parameters is simple and an easy way to configure a ThinOS thin client to be a basic
network print server, to share local printers with other thin clients.
Your INI parameters will look something like the following:
Printer=LPT1 \
Name="HP LaserJet 4000" \
PrinterID="HP LaserJet 4000 Series PCL" \
Enabled=yes \
EnableLPD=yes
NOTE:
The PrinterID is the exact text of the Windows printer driver name, so if a printer driver is named HP LaserJet 4000
Series PCL in Windows, then it must be exactly the same in the PrinterID field in the INI parameters including capitalizations
and spaces.
Configuring ThinPrint
No ThinPrint specific configuration is available on the thin clients. Thus to be able to use ThinPrint, users must first set up their
printers according to the user documentation, and then configure ThinPrint on the thin client using the Printer Setup dialog box.
166
Examples of common printing configurations