Administrator Guide

the application. DNS uses the default domain name in the network control panel to attempt to construct an FQDN.
However, it tries to resolve the name without using the default value.
e. Encryption Level—Allows you to select the security level of communications between the thin client and the ICA
server.
Basic (the default option) is the lowest level of security. Basic enables faster communication between the device and
the ICA server because it requires less processing than the higher levels of encryption.
NOTE: The encryption selection applies to the security of communications between the thin client and the ICA
server only. It is independent of the security settings of individual applications on the ICA server. For example, most
web financial transactions require the thin client to use 128-bit encryption. However, transaction information could
be exposed to a lower level of security if the thin client encryption is not also set to 128–bits.
f. Use HTTP for browsing—When selected, the thin client, by default, uses HTTP when browsing.
g. Alternate address via firewall—When selected, the thin client uses an alternate IP address that is returned from the
ICA master browser to get through firewall. This is used for the Windows login when the connection is activated.
h. Display Resolution—Select the display resolution for this connection.
If you select the Published Application option, the Connection Display allows you to select the Seamless Display
Resolution option.
i. Colors—Select the color depth of the ICA session. If High Colors (16-bits) or True Colors is selected and the ICA
server does not support this color depth, the thin client sets the color depth to the lower value, for example, 256 Colors
(8-bits).
j. Window mode and Full screen mode—Select the initial view of the application and desktop in a windowed screen or
full screen.
k. Auto-connect on start-up—When this option is selected, the thin client automatically connects the session on start-
up.
l. Reconnect after disconnect—When this option is selected, the thin client automatically reconnects to a session after
a non operator-initiated disconnect. The wait interval is the value that you set in the Delay before reconnecting box
(enter the number of seconds 1–3600). The default is 20 seconds, if there is no INI parameter used for this connection,
or if you are a stand-alone user.
5. Click logon tab, and use the following guidelines:
Configuring the connection brokers
73