Administrator Guide

Figure 9. Second authentication factor window with the message
If you enter a wrong password or PIN, the second authentication factor window is displayed with the warning message OneSign
could not authenticate you. Try again.
Figure 10. Second authentication factor window with the warning
Use smart card as proximity card
You can use a smart card as a proximity card to authenticate the user. When you tap the smart card on the smart card reader,
the Imprivata agent uses the smart card unique serial number as the Unique ID (UID) of the proximity card.
To use a smart card as proximity card, do the following:
1. Log in to the OneSign Administrator console.
2. Go to the Policies page and click Computer Policy.
3. In the Smart card readers section, select the Treat smart card authentications as proximity card authentications
check box.
To authenticate the user using a proximity card, connect a supported reader to the thin client. Before you tap the card, ensure
that your card is already enrolled to the user. When you tap your card on the reader, the thin client authenticates the user and
starts the VDI connection.
Configuring connectivity
67