Reference Guide

Option Description
IMPORTANT:
The application server password is not encrypted; it is
strongly recommended not to specify it. The user will be
prompted to enter the password when the connection is
made. This application server password directive never starts
a line, so it can be distinguished from the thin client user
sign-on password which does starts a line.
NOTE:
The Password option is not written into a {username}.ini le
by a user. When the New Password check box is selected,
the system writes the new, changed password into the
{username}.ini le with encryption. This password is then
checked against the sign-on password with encryption to
determine whether sign-on is successful.
Password-enc=an encrypted password Species an encrypted string as a password for a connection.
Reconnect={no, yes, 1 to 3600 (seconds)} Default is no.
Controls automatic reconnection to an application after a server
disconnection.
yes — Use to restart the connection; the default delay time for yes
reconnect is 20 seconds.
no — Use to prevent reconnection after a disconnect.
1 to 3600 — Use an integer value of 1 to 3600 seconds to restart
the connection after the delay you want. For example, use 50 and
the automatic reconnection to an application will occur after 50
seconds.
Resolution=[default, Seamless, <monitor resolution>] Default is default.
Species the connection display resolution.
default — Starts the connection using the current desktop display
setting with no window frame and border.
Seamless — Available for use if the connection is to a published
application. For Seamless connections, the MetaFrame hosts select
the best-t connection window for applications.
<monitor resolution> — Resolution values you can use in the form
X x Y depending on your client. Example for monitor resolution:
1024 x 768. See the Release Notes of your client.
SessionReliability={no, yes}
Default is no.
Yes/no option to enable session reliability.
NOTE:
ThinOS thin clients do not support UDP browsing to obtain a
new conguration about session reliability on the server. The
thin client always connects to the default port.
UniSession={no, yes}
Default is no.
100 Connect Parameter: Options