Reference Guide

RDP connect options
Table shown here contains the supported options used for RDP connections after you use the Connect=RDP parameter/selection.
IMPORTANT:
If an option has an underlined value (default), that option and default value will automatically be used with Connect=RDP; options
without underlined values can also be used if you want to, but are not automatically used with Connect=RDP. In addition, when using
options, you can leave the default value or change it to another value shown.
For example, in the following case where:
Connect=RDP
[Option1={0, 1}]
[Option2={1, 2, 3, 4}]
Since you are using Connect=RDP, then Option 1 and its default value 0 will automatically be used as Option1 has an underlined value
(default of 0). You can still use Option 2 if you want to, however, Option 2 is not automatically used with the parameter as Option 2 does
not have a default (underlined) value.
NOTE:
Any option in RDP Connect Options that is used in a {username}.ini le will return to the default value set for that option in the wnos.ini
le after a user sign-o.
For example, if your {username}.ini le contains the option Reconnect=yes (so that a lost connection will restart 20 seconds after
disconnection) and you sign o of the thin client, then the Reconnect value will return to the original default value of no
(Reconnect=no) contained in the wnos.ini le—so that others who sign in can use their own user prole assuming the administrator
has not changed the default values in the wnos.ini le.
RDP connect options
Table 14.
RDP connect options
Option Description
Autoconnect={0 to 99}
Default is 0.
Use for automatically starting a session after sign-on, if sign-on is
enabled.
The value of 0-99 is the delay in seconds before auto-starting the
session.
Colors={256, 32k, 64k or high, 16m, true}
Default is high.
Session color mode. For faster display performance, use 256 colors
for the session.
• 256 is 8-bits
• 32k is 15-bits
• 64k or high is 16-bits
• 16m is 24-bits
• true is 32-bits
102 Connect Parameter: Options