Reference Guide

Parameter Description
CCM server is https://us1.cloudclientmanager.com and default
MQTT server is us1-pns.cloudclientmanager.com.
Override — Default is no. Yes/no option to allow a groupkey from
the INI le to override the previous groupkey. If Override=yes is
specied, the groupkey from the INI le will override the previous
groupkey. The Groupkey can technically be applied in many places.
You can congure the group key in order of priority, that is, if #1 is
dened it will override #2. Groupkey priority policy is listed below:
1 Local GUI conguration or groupkey received from CCM in a
Group Change command
2 Dened in INI le "ccmenable=yes groupkey=xxxx"
3 DHCP Option Tag #199
NOTE:
The Groupkey assigned in DCHP option #199 and INI
parameter are only used for rst time deployment, that is,
they only take eect if CCM is currently disabled or if CCM
is enabled but group-key is NULL.
If DCHP is dened and CCM is enabled or not NULL: The
CCM Group key in the DHCP is ignored since it is congured
manually in local UI or from CCM group change.
If INI is dened and CCM is enabled or not NULL: The CCM
Group key in the INI is ignored since it is congured manually
in local UI or from CCM group change.
IMPORTANT:
There is an exception in the logic above when the
'override=yes' option is used in INI le. This will make #2 take
priority over #1.
For example,
CCMEnable=yes CCMServer=xxx:8080
GroupPrefix=wlab GroupKey=TC-TEST-ENG
MQTTServer=xxx:1883 AdvancedConfig=yes
Override=yes
NOTE:
For detailed instructions on how to congure CCM in a
wnos.ini le to enable the CCM Agent on supported ThinOS
clients, refer to Knowledge Base Solution #23875, go to the
Knowledge Base at www.dell.com/wyse/knowledgebase and
search for 23875.
CAValidation—If the option is set to yes, then the CCM agent will
check the certicate when connected to https server. Default value
is yes.
Discover— If the option is set to yes, then the CCM agent will
discover the CCM server, MQTT server and CA validation from
DNS Record. Default value is yes.
IgnoreMqtt—If IgnoreMqtt=yes is specied, CCM agent will not
connect to MQTT server. Default value is no.
DefaultUser={username, $SYS_VAR}
[Display={yes, no}]
Species the default sign-on user. See System Variables for a list of
system variables for $SYS_VAR.
14 Parameters for wnos INI les only