Reference Guide

Parameter Description
[disable={yes/no}] Display—If the value is set to yes, the username eld in sign-on
window will be displayed. By default the value is set to no and the
eld will be obscured with asterisks (*).
disable— If the value is set to yes, the user name eld in sign-on
window is disabled.
Password=<sign-on password>
[disable={yes/no}]
[encrypt={no, yes}]
Password— Species the password as the sign-on password.
There is no minimum length. The maximum length is 64 characters.
In wnos.ini this sets as the default password. The system will sign
on automatically and not wait for username, password, and domain
entries.
Disable—If the value is set to yes, the password eld in sign-on
window is disabled. Default is no.
encrypt - The default value is no. The options are used to enable or
disable an encrypted string for a password in the INI le instead of
clear text. If the value is set to yes, the password in the INI is an
encrypt string instead of clear text.
DisableButton={no, yes}
[DisableRestart={yes, no}]
Default is no.
Yes/no option to disable the power button.
If you set the option DisableRestart=yes, the radio button Restart
the system in shutdown window is disabled. These settings are
saved permanently and the default value is no.
EnableCacheIni
IMPORTANT: Supported on Wyse 3010 thin client with
ThinOS (T10) and Wyse 3020 thin client with ThinOS
(T10D) only.
EnableCacheIni is no longer supported and cannot be used on
platforms other than the Wyse 3010 thin client with ThinOS (T10).
On platforms other than the Wyse 3010 thin client with ThinOS
(T10), EnableCacheIni is replaced by the MirrorFileServer
parameter, see MirrorFileServer parameter in
General Settings for
wnos.ini Files Only. Use EnableCacheIni on Wyse 3010 thin client
with ThinOS platform (T10) only. This is because there is no local
ash on Wyse 3010 thin client with ThinOS (T10) platform, and the
MirrorFileServer parameter is not supported on it.
EnableGKey={yes, no}
Default is yes.
Yes/no option to enable G key reset. G key reset is supported for
Privilege=High in the NVRAM.
Exit={yes, no, all}
Default is yes.
Species the INI le processing.
yes — Processing returns to the prior INI le on the next line after
$include.
no — There is no operation.
all — All INI le processing is exited.
Include=<$mac.ini le or {username}.ini le> <$MAC.ini> Loads /wnos/inc/mac-address.ini.
Parameters for wnos INI les only 15