Reference Guide

Parameter Description
NOTE:
The le name does not include the symbol : in the mac
address. See also the Exit parameter for information on how
to terminate Include. <{username}.ini> Loads /wnos/inc/
{username}-address.ini.
The le name does not include the symbol : in the
{username} address. See also the Exit parameter for
information on how to terminate Include.
MirrorFileServer={no, yes}
Default is no.
Yes/no option to enable the cache all server les functionality. This
enables the cache all server les such as INI les, wallpaper, bitmap,
font, local messages and so on to the local ash when les are
changed in the le server. ThinOS would use the cached les when
les on the le server are unavailable.
IMPORTANT: S10 is not supported
RootPath=<le server root path>
This le server root path is entered into thin client local setup (non-
volatile memory). The thin client immediately uses this path to
access les. The directory name \wnos will be appended to the le
server root path entry before use.
TerminalName=<name>
[reboot={no, yes}]
TerminalName — Name of the client comprising a 15-character
string. It can also be congured with system variables. Basically all
the variables can be used except $TN (recursive), $UN, $PW, $DN.
However, these are not yet available when parsing wnos.ini.
Additionally combinations like xy$mac, sz$tnxyz etc are supported.
reboot — Default is no. Yes/no option to reboot the thin client if
the terminal name is changed.
TimeZone=<zone value>
[ManualOverride={no, yes}]
[daylight={no, yes}]
[start=MMWWDD end=MMWWDD]
[TimeZoneName=<timezonename>]
[DayLightName=<daylightname>]
TimeZone — Species the time zone if the zone is unspecied on
the thin client or is used with ManualOverride. Supported zone
values s are listed in the System Preference dialog box on the thin
client and in TimeZone Parameter: Values.
NOTE:
The TimeZone parameter is dependent on the
TimeServer=parameter. If a time server is not dened, the
client CMOS/BIOS internal clock will be used as a reference.
ManualOverride — Default is no. Yes/no option to override the
thin client System Preference Menu setting with this TimeZone
setting. TimeZone settings in the wnos.ini le will be saved into
NVRAM if EnableLocal=yes is set in the wnos.ini le.
Daylight — Default is no. Yes/no option to enable daylight saving
time; MMWWDD is a 6 digit number to specify the start and the
end of daylight saving time.
16 Parameters for wnos INI les only