Reference Guide

Table 5. Peripheral Settings: wnos.ini les only
Parameter Description
DEVICE_SECURITY=white_list/black_list
vid_pid=[vvvv,pppp]
class=name/[cc,ss,pp]
1 When DEVICE_SECURITY=white_list is set, the security is in
high level, and you need to add all the devices (on board
devices including Wyse 3020 thin client with ThinOS (T10D)'s
netcard, and internal hub) to the list that you want to use, and
all other devices are denied when the device is plugged-in.
2 When DEVICE_SECURITY=black_list is set, the security is
mid-level, and customer can add the device which is not
present in the list.
3 About key value: all the value are hex, and vid_pid =
0xvvvvpppp, class value is =0xccsspp; where,
• vvvv=device vendor id
• pppp=device product id
• cc= device interface class
• ss=device interface subclass
• pp=device interface protocol
4 Class name is abbreviation for the dened class. Valid names
are listed here:{Audio, CDC_control, HID, Pysical, Image,
MASS_STORAGE, Hub, CDC_Data, Smart_Card,
Content_Security, Video, Personal_Healthcare,
AudioVideo, Billboard, Diagnostic_Device,
Wireless, Miscellaneous, Application, VendorSpecic}. For
detailed information, refer: www.usb.org/developers/
dened_class
.
5 The max number of devices/class table is 16.
For Example:
DEVICE_SECURITY=white_list class=HID class=Audio
class=Video
DEVICE_SECURITY=black_list vid_pid=0x0B0E2000
class=0x030101.
PrinterMap=a text
le name or possibly URL.
A text le to be included to dene printer mappings. Each line in the
le is of format Printer Identication=Printer Driver Name. For
example: HL-1240 Series=HP LaserJet.
ThinPrintEnable={no, yes}
[Port=port number]
Default is yes.
ThinPrintEnable — Yes/no option to enable the thinprint client.
port—The TCP port of the thinprint client. The default port
number value is 4000. The port number value must be less than
65535.
Connection settings for wnos.ini les only
The following table contains the parameters used for conguring the connection settings. The default values are underlined.
Table 6.
Connection Settings: wnos.ini les only
Parameter Description
AddCerticate=lename AddCerticate — Species a certicate le residing in the
subfolder cacerts under the wnos folder to load on platforms with
18 Parameters for wnos INI les only