Reference Guide

Parameter Description
password={plain text password}
Password-enc={encrypted password}
nand ash, or on the memory. The length of the lename, including
the trailing period and the le extension, is limited to 64 characters.
AddCerticate must be used when conguring the Citrix Secure
Gateway PNAgent Interface (PNAgent/Lite servers) in the
Network Setup dialog box.
Adding certicates are required if the user CSG environments use
certicate agents that are not covered by the built-in certicates.
The certicates are used to validate server identities by the thin
client. Supported les include .crt le on ICA CSG; .cer and .pfx in
802.1x. Password and Password-Enc are specially used with PFX
les.
CaradigmServer=vip list
[EGPGroup=group name]
[EnableLogO={yes,no}]
[SecurityMode={default, full, warning, low}]
[DisableManualLogon=yes, no]
CaradigmServer=vip list contains a list of VIP addresses with
optional TCP port number of Caradigm servers. EGPGroup denes
the user group name. If EnableLogO=yes is specied, the user is
logged o from the session before system signs o. Otherwise the
session is disconnected. The logged o user has a timeout value
which can be set using SessionCong parameter
SessionLogOTimeout.
The default timeout value is 1, if no SessionLogOTimeout is
specied.
SecurityMode species the SSL certication validation policy.
If set to default, it applies the SecurityPolicy setting.
If set to full, the SSL connection needs to verify server certicate.
If it is untrusted, drop the connection.
If set to warning, the SSL connection needs to verify server
certicate.
If it is untrusted, it is up to you to continue or drop the connection.
If set to low, the server certicate is not checked. The value is
persistent, the default value of the setting is default.
DisableManualLogon is set to yes to disable user to manually enter
credentials to authenticate into the device. It only allows an already
enrolled proximity badge and in active grace period to authenticate
with a single badge tap. The default value is no
Community=community
[Encrypt={yes, no}]
Species the SNMP community name. A string up to 31 characters
are allowed. After the value is specied, it is saved in the non-
volatile memory.
If encrypt=yes, an encrypted string is used as a community name.
The default value is set to no.
NOTE: Use our Windows Password_Gen tool or built-in
tool to generate the encrypted string.
ConnectionBroker={default, VMware, Microsoft, Quest, AWS}
[IgnoreProle={yes, no,}]
[SecurityMode={Default,Low,Warning,Full}]
[EnableVWGateway]={yes, no}
Default value is default. Species the type of VDI broker to use.
Default is a 3rd party VDI broker.
AWS is Amazon Workspace broker. It is only available with PCoIP
build.
IgnoreProle — Default value is no.
Parameters for wnos INI les only 19