Reference Guide

Parameter Description
Yes/no option to disable the drop-down domain list in the
PNAgent/PNLite Sign-on dialog box.
DNSIPVersion={ipv4, ipv6}
[DNSServer=server_list]
[DNSDomain=dns_domain_url]
[Combined={yes,no}]
Species the DNS server and domain. Default IP version is ipv4.
The DNS Server is an IP list separated by ; or ,. The maximum size
of this list is 16. For example: 10.200.5.53;192.168.100.1;192.168.200.8
IMPORTANT: There is no space after the ;.
If Combined=yes, then the DNS server will combine the DNS
server congured by DHCP and the static one. DNS domain will use
the value congured by DHCP if static DNS domain is empty.
DNSTTL={0-3600}
Species the Time to Live (TTL) of DNS name caching; the default
is from DNS server settings.
NOTE:
If DNSTTL=0, the DNS hostname in a connection always
queries the DNS server to get the IP.
DomainList=List of NT domain names
[disable={yes/no}]
A list of domain names that will appear in the thin client Sign-on
dialog box as options to help users in selecting the domain to sign-
on to PNAgent/PNLite servers. Once specied, it is saved in non-
volatile memory.
NOTE:
Be sure to enclose in quotation marks if spaces are included.
For example: DomainList=North_America, SQA, test-domain.
disable— If the value is set to yes, the domain eld in sign-on
window is disabled.
Dualhead={no, yes}
[ManualOverride={no, yes}]
[Mainscreen={1, 2}]
[Orientation={hort, vert}]
[Align={Top|Left, Center, Bottom|Right}]
[Taskbar={wholescreen, mainscreen}]
[MonitorAutoDetect={yes,no}]
[Swap={no, yes}]
[EnsureDpIsOn ={yes, no}]
Default is no.
Dualhead — Yes/no option to support a dual-monitor display.
Default no sets monitors to mirror mode; yes sets monitors to span
mode.
ManualOverride — Default is no. Yes/no option to allow the local
client to override display dualhead settings received from central
conguration.
If reset to factory defaults, it will once again take server settings for
dualhead. This is helpful for scenarios where you have a mixture of
dual head and single head deployments.
For example:
Dualhead=yes ManualOverride=yes
Mainscreen=1\Orientation=hort
Taskbar=mainscreen
NOTE:
If using, be sure the ManualOverride option is the rst option
used after the Dualhead parameter position in the statement.
Mainscreen — Sets which screen is used as the main screen.
When using a DVI to DVI and VGA cable, the DVI connected
monitor will be the default mainscreen=1.
Parameters for wnos INI
les only 23