Reference Guide

Parameter Description
home directory and the le, is limited to 128 characters. If auto dial-
up is enabled, this statement is invalid.
HealthCastServer=vip list
[LogLevel={0, 1, 2 ,3}]
[SecurityMode={default, full, warning, low}]
[ClientCerticate=certicate le name]
Species a list of VIP addresses with optional TCP port number of
HealthCast servers.
LogLevel—The option LogLevel is for debug purpose; 0 means no
log.
SecurityMode —Species the SSL certication validation policy. If
set to default, it will apply SecurityPolicy setting. If set to full, the
SSL connection needs to verify server certicate. If it is untrusted,
then drop the connection. If set to warning, the SSL connection
needs to verify server certicate. If it is untrusted, you may still
continue or drop the connection. If set to low, the server certicate
will not be checked. The value will be persistent, and the default
value of the setting is default.
ClientCerticate —The option species the client certicate le
name during SSL connection between Healthcast server and client.
INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes to 480
minutes.If the value given is bigger than 480, 480 is set instead. If
the value given is smaller than 0, 0 is set instead.
When the system idle is time out in the congured minutes, the
system will automatically sign o, reboot or shutdown which are
based on the setting of AutoSigno.
NoSessionTimer— The parameter NoSessionTimer has the same
range as INACTIVE and it is valid only if INACTIVE value is not 0. If
there is a session use the value of Inactive, otherwise use the value
of NoSessionTimer, if NoSessionTimer is congured.
If AutoSigno=yes Shutdown=yes is congured, then this
statement can work before signon.
If AutoSigno=yes Reboot=yes is congured, this statement can
work before signon.
LockTimer—If the parameter LockTimer is set, the terminal is
locked and the system idle is timeout in the congured seconds;
System will automatically sign o, reboot or shutdown based on the
setting of AutoSigno.
LongApplicationName={no, yes}
Default is no.
Yes/no option to display all 38 characters in a desktop icon name. If
LongApplicationName=no, then icons will display up to 19
characters; any over 19 characters and the last three characters will
be “…”.
MaxVNCD={0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.
Option to enable VNC shadowing. Default value is 0 means VNC
shadowing is disabled. Set to 1 to enable shadowing.
NOTE:
Only one VNC client session is allowed and a password is
required.
26 Parameters for wnos INI les only