Reference Guide

Parameter Description
[Session_Logging_Level={0,1,2,3,4}] The option Broker_Logging_level and Session_Logging_Level
accord to PCoIP broker log level and PCoIP session log level. The
default value is 0 which means critical log, 1 means log severity
error, 2 means log severity info, 3 means log severity debug, and 4
means log severity unrestrained.
PlatformCong=all
[EncryptFS=yes]
Encrypts local ash, specically cached INI les and credentials that
are stored, if using signon=yes.
NOTE:
Event log will display new statements stating that FileSystem
encryption has been enabled.
PlatformCong=”C/V/S/R/T Class”
[Firmware={Firmware lename}]
[BIOS={BIOS lename}]
[ECFirmware={EC lename}]
If a specic platform is specied by the PlatformCong parameter,
then ThinOS will attempt to load the Firmware and BIOS whose
lenames are specied by the Firmware and BIOS parameters.
If the written Firmware and BIOS are valid on le server, they will be
loaded by default; if the written Firmware and BIOS are invalid on
le server, ThinOS will load the platform default Firmware and BIOS
instead.
For example: If you re-name the Wyse 3010 thin client with ThinOS
(T10) rmware le from DOVE_boot to DOVE_boot_8.0_037., then
you must use platformcong-="T Class", then add
Firmware=DOVE_boot_8.0_037.
ThinOS will look on the le server for this exact rmware name. If
that dened rmware name is not found, then ThinOS will fall back
to the default logic and look for the DOVE_boot rmware.
ECFirmware is only used for Wyse 3010 thin client with ThinOS
(T10)/X10J/X10CJ to update EC rmware, it is not supported on
other platforms.
C: C10LE V: VL10
S: S10 R: R10L
Wyse 3010 thin client with ThinOS (T10)
If the ECFirmware le name is not specied, device will look for EC
with default name: T10: T10_EC.bin
Proxy={yes,
no}
AppList={ccm;fr;rtme;wms}
[Type={Global, http, https, socks5}]
[Server=_host_port_]
[User=_user_name]
[Password=_password_]
[Encrypt={yes, no}]
Species the proxy settings which are saved in non-volatile
memory. If Proxy=no, all proxy settings are cleared and all
the followed options are ignored.
If Proxy=yes, the option AppList must be followed. It species
which applications are applied to connect through proxy. WMS,
CCM, FR, and RTME are supported. The application name is
separated with semicolon.
NOTE: Wyse Management Suite is the successor to Cloud
Client Manager (CCM).
The following options are used to congure one or several proxy
server setting. The option Type species the proxy protocol
including http, https and socks5. The option Server species the url
of the proxy server. The option User and Password specify the
credentials of this proxy server. The option Encrypt species if the
password is encrypted or not.
30 Parameters for wnos INI les only