Reference Guide

Parameter Description
The option User and Password can support system variables.
Because CCM runs before sign on, it is not appropriate to use $UN
and $PW.
If Type=Global, the proxy settings are saved into http proxy setting,
and the https and socks5 proxy settings use the same setting as
http proxy. And the followed proxy settings will be ignored.
For example,
Proxy=yes AppList=fr \
Type=http Server=server1:1234 user=$UN password=$PW
(OR)
Proxy=yes AppList=ccm \
Type=http Server=server1:1234 user=abc password=xyz \
Type=socks5 Server=server2:4321 user=abc password=1234
(OR)
Proxy=yes AppList=ccm;fr;rtme \
Type=Global Server=server_global user=user_global
password=password_global_encrypted Encrypt=yes
RapportDisable={yes, no}
[DHCPinform={yes, no}]
[DNSLookup={yes, no}]
[QuickMode={yes, no}]
[Discover={yes, no}]
[SecurityMode={default, full, warning, low}]
Set to yes to disable the Rapport agent.
If RapportDisable=no, the Rapport agent is enabled and you can
discover the WDM server by the following ways:
1 The DHCP option tag values received from standard or WDM
proxy DHCP service for vendor class RTIAgent
2 DNS service location record "_wdmserver._tcp"
3 DNS host name lookup "wdmserver"
If RapportDisable=no, set DHCPinform=yes to perform the WDM
server discovery as mentioned in number 1; set DNSLookup=yes to
perform the WDM server discovery as mentiomned in number 2
and 3.
If QuickMode=yes is specied, rapport agent will not block any
other process during ThinOS boot up, and boot time of ThinOS will
speed up.
NOTE: If le server is changed by WDM server, device will
reboot automatically to make sure all settings from WDM
server take eect. Default is yes.
Discover— If Discover=yes is specied, rapport discovers the
WDM server information from DHCP option tag, DNS service
location record and DNS host name. If the WDM server is
discovered, the WDM server User Interface (UI) is protected on the
device. The default value is yes.
SecurityMode species the SSL certication validation policy. If set
to default, SecurityPolicy setting is applied.
If set to full, the SSL connection needs to verify server certicate.
If it is untrusted, drop the connection.
Parameters for wnos INI
les only 31