Reference Guide

Parameter Description
If the rst boot order is not HardDisk, the system restart will boot from the BIOS
setting.
BootpDisable={no, yes}
Default is no.
BootpDisable — Yes/no option to disable BOOTP requests. ThinOS supports both
DHCP and BOOTP to obtain the network congurations. In the rst two attempts,
only DHCP is requested. Then, both DHCP and BOOTP are requested.
For some environments, BOOTP requests will delay obtaining the IP from the DHCP
server. Set BootpDisable=yes will only perform a DHCP request. This setting is only
valid after the next reboot.
CmosPassword=<password>
[encrypt={no, yes}]
CmosPassword — Species the BIOS password on supported platforms; string up to
8 characters.
encrypt — Default is yes. If encrypt=yes, an encrypted string is used as a password
and the password is encoded by Dell Wyse encrypt tool.
CustomInfo={yes, no}
[Custom1=custom1_str]
[Custom2=custom2_str]
[Custom3=custom3_str]
[Location=location_str]
[Contact=contact_str]
Yes/no option to congure or store custom information. If CustomInfo=yes, the
custom information congured by the following options will be stored into NVRAM. If
CustomInfo=no, the custom information in NVRAM will be cleared.
For example:
CustomInfo=yes custom1=11 custom2=2 custom3=3 location=wyse
contact=peter\
NOTE: Maximum length is 32 characters.
**DeskColor=”rrr ggg bbb”
Default is “16 100 36”; where DeskColor =“16 100 36” (green) is the default.
Species the desktop background color in RGB string format that must be enclosed in
quotes, where rrr, ggg, and bbb are decimal numbers in the rage of 0 to 255. When
using this parameter in a wnos.ini le, it will be saved to NVRAM if EnableLocal is set to
yes in the wnos.ini le.
NOTE:
The MirrorFileServer parameter also supports the DeskColor parameter.
Desktop=bitmap le
[Layout={tile, center, stretch}]
[IconTextColor="rrr ggg bbb"]
Desktop — Species a bitmap le to be used as wallpaper for the local desktop. This
le could be a 4-bit, 8-bit, or 24-bit BMP le or a standard GIF le or a standard JPEG
le. The le must be located in the FTP server wnos\bitmap directory. Default is Wyse
wallpaper. To disable the parameter, leave value blank (Desktop=wysedefault).
When bitmap le is set in wnos.ini, at next restart, the thin client does not show Dell
default wallpaper until INI wallpaper is loaded.
To recover the Dell default wallpaper, set Desktop=DELLDEFAULT in wnos.ini or do a
factory reset.
When the parameter is set to Desktop=WYSEDEFAULT, the old Dell logo wallpapers
that was used in versions earlier than ThinOS build 8.5.0 are loaded.
When the parameter is set to Desktop=''', the wallpaper is disabled.
Layout — This parameter species the arrangement on the desktop background of
the bitmap le specied by the Desktop parameter. If auto dial-up is set, the Layout
parameter becomes invalid. The default value is stretch.
46 Parameters for wnos INI, {username} INI, and $MAC INI les