Reference Guide

Parameter Description
3 — Showing Pictures
4 — Playing Video
If the value is set to Type=None, and the parameter LockTerminal is set to a non-zero
value, the unlocking window is displayed when the screen saver times out.
VideoLink — Species the video link address of the video le. Links with only http are
supported. The mp4 video format is supported.
VideoSpan — Species the video displayed mode in the screen. If the dual head is in
span mode and VideoSpan=yes, it is spanned across all the screens. If VideoSpan=no,
it is displayed in the main screen.
Imagele — This is an optional parameter and species an image le residing in the
bitmap sub-folder under the home folder to be used as a Moving Image screensaver.
If Type is set to 2 and no image le is present then the default Dell Wyse logo is used.
If Type is set to 3, pictures residing in picture subfolder under the home folder are
displayed.
If SelectGroup=yes, then the pictures residing in the picture subfolder under the
group folder are displayed. For example, /wnos/ini/{group_dir}/picture
If group pictures do not exist, global pictures are used. Supported formats include JPG,
GIF, PNG and BMP.
PictureTimer — Species the interval to wait in seconds to display another picture.
Default value is 6 seconds.
PictureOrder — Species the order of picture les to display. The default is to use
the order of sort from A to Z. If set to random, pictures are displayed randomly.
PictureCheck — Species whether to check for picture les servers or not.
NOTE
:
If set to always, the picture les in le servers are checked when the screen
saver starts every time. By default, the system checks for picture les only
when the screen saver starts for the rst time to decrease network trac.
PictureLayout— The optional parameter is used to specify the arrangement on the
desktop when pictures are displayed. For the tile selection, the image is replicated
across the desktop. For the center selection, the image is placed at the center of the
desktop without any image size change. For the stretch selection, the image is either
expanded or shrinked to ll the desktop. The default value is stretch.
Sleep—The optional parameter is used to specify the interval minutes to stop soft
screen saver and turn o monitor. After the specied minutes, since software screen
saver starts up, the software screen saver is stopped and turns o the monitor until
screen saver is o. The value range is 0 to 180. The value 0 is default which disables
this function.
**ShutdownCount={0 to 60} (seconds)
or
**ShutdownCounter={0 to 60} (seconds)
ShutdownCount or ShutdownCounter — Species the number of seconds to count
down before the shutdown sequence starts upon using the thin client power button
when there are active sessions.
The default value is 10, however, to commence shutdown immediately and prevent the
display of the countdown dialog box, set the value to 0.
ShutdownInfo={no, yes}
Yes/no option to display various information such as System Version, Terminal Name,
IP Address, and MAC Address in shutdown window.
Parameters for wnos INI, {username} INI, and $MAC INI les 59