Reference Guide
Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
3 — 1/4
4 — 1/5
5 — 1/6
optimize — Default is no. Yes/ no option to optimize the width,
height, and fps at 320 x 240 at 10 fps. That is, if optimize=yes, then
320 x 240 at 10 fps will be used for the local camera settings
regardless of the individual settings in width, height, and fps; as
long as the camera supports the 320 x 240 at 10 fps.
If optimize=yes and the camera does not support the 320 x 240 at
10 fps settings, an error will be present in the Event Log of ThinOS.
If optimize=no then the individual settings in width, height, and fps
will be used as long as the camera supports them.
Disable— When you specify Disable=yes, the device is disabled.
For example, the Camera tab in peripherals setting is disabled, the
Exclude video devices option in Global Connection Settings is
disabled. The device cannot be accessed at local and remote
sessions.
**Device=keyboard
[numlocko={no, yes}]
[repeatrate={0, 1, 2}]
[repeatdelay={0, 1, 2, 3, 4, 5, 6, 7}]
Device — Species the local keyboard.
numlocko — Default is no. Yes/no option to turn o the
NumLock of the keyboard.
repeatrate — Default is 1. Species the keyboard repeat rate.
0 — Slow
1 — Medium
2 — Fast
repeatdelay — Default is 2. Species the keyboard delay in
seconds, before repeat.
0 — 1/5
1 — 1/4
2 — 1/3
3 — 1/2
4 — 3/4
5 — 1
6 — 2
7 — No Repeat
NOTE
:
These settings in a wnos.ini le are saved into NVRAM if
EnableLocal is set to yes in the wnos.ini le.
Parameters for wnos INI, {username} INI, and $MAC INI les 63