Reference Guide
Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
Device=mouse
[Speed=[1-9]]
[Swap={yes, no}]
[FlipFlopWheel={yes, no}]
Speed is used to congure the speed of the moving mouse. 1 is the
slowest, 9 is the fastest. The default value is 6. This parameter is
the replacement of MouseSpeed.
If the option Swap is set to yes, the right button is set as the
primary button. The default value is no.
If the option FlipFlopWheel is set to yes the mouse scroll wheel is
inverted. The default value is no.
Device=Rdeas
[DisableBeep={yes, no}]
[DisableKeystroke={yes, no}]
[SetCardType={yes, no} Conguration1={*} Conguration2={*} ]
[DisableInitialization={yes, no}]
[DisableLed={yes, no}
Device=Rdeas — Species the local Rdeas readers.
DisableBeep — Default is yes. Option disables the beep sound
when the card is read.
DisableKeyStroke — Default is yes. Option disables the keyboard
movements and key strokes.
SetCardType — Default is no. Used only for pcProx Plug readers.
• If set to yes, then the Conguration #1 initializes to HID Prox
608x compatibility and Conguration #2 initializes to RDR-758x
Equivalent.
• If set to no, then the card type remains unchanged.
DisableInitialization — Default is no. Option disables congurations
to the card reader.
DisableLed—If set to yes, then LED is turned o. If set to no, then
LED is controlled by Reader. The default value is not set.
Device=UsbSerial
[start=com{1~4}]
[com{1~4}=com{5~8}]
Species the rst COM port number that can be used by USB-
serial port.
For example, the rst USB-Serial port on a VL10 thin client is
COM2 by default, but it can be changed to COM3 with the INI le
Device=UsbSerial Start=COM3.
1 Without any ini setting: The COM number registered is related
with USB port number. Since USB port number is hardware
property, it is always mounted in the same order, and there is
no relation with the plug sequence.
2 If Device=UsbSerial start=COMx is set, then rule 1
does not work, the COM number is set by "x", and "x" range is
1-4, since ThinOS only supports maximum of four COM.
3 If COMx=COMy is set, the range for x is 1 - 4, and the real
name in ThinOS is considered. The range for "y" is 5 - 8, since
ICA running on ThinOS only supports maximum of eight COM.
NOTE: The INI [com{1~4}=com{5~8}] is applicable for
ICA connections only.
**DisableMouse={no, yes}
or
MouseDisable={no, yes}
DisableMouse — Default is no. Yes/no option to disabled mouse
pointer so that it is shown on the screen. The pointer is enabled if
any mouse activity occurs.
or
MouseDisable — Default is no. Yes/no option to disabled mouse
pointer so that it is shown on the screen. The pointer is enabled if
any mouse activity occurs.
64 Parameters for wnos INI, {username} INI, and $MAC INI les