Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
[Username=username]
[Password=password]
[Domain=domain name]
Class — Used in ThinPrint print for TPAutoconnect; the ThinPrint
technology of mapping the printer from the client side. It can group
printers to use the same template on the ThinPrint server side. The
strings PCL5, PS, and TXT are pre-dened classes. Class can be a
string with 7 characters.
Enabled — Default is yes . Yes/no option to enable the printer.
EnableLPD — Default is no. Yes/no option to enable the LPD
printer.
Username — Species the username of a user who can use the
SMB printer.
Password — Species the password of a user who can use the
SMB printer.
Domain — Species the domain name of the SMB printer.
**RepeatDelay={0, 1, 2, 3, 4, 5, 6, 7}
Default is 2. Species the keyboard delay before repeat in seconds.
0 — 1/5
1 — 1/4
2 — 1/3
3 — 1/2
4 — 3/4
5 — 1
6 — 2
7 — No Repeat
**RepeatRate={0, 1, 2}
Default is 1. Species the keyboard repeat rate.
0 — Slow
1 — Medium
2 — Fast
*Resolution=[DDC, 640X480, 800X600,
1024X768, 1152X864, 1280X720,
1280X768, 1280X1024, 1360X768,
1366X768, 1368X768, 1400X1050,
1440X900, 1600X900, 1600X1200,
1680X1050, 1920X1080, 1920X1200]
[Refresh=60, 75, 85}
[rotate={right}]
Default is DDC.
Resolution — Species the local display resolution. Option DDC
can be specied to select default display resolution.
NOTE:
When using the Wyse Y Cable, DDC will properly work on
both monitors by default. However, if connected to R10L/
R00x clients and you are using Dual DVI, then you must add
the following DualHead INI parameter and DualHead option
for DDC to properly work on both monitors:
Parameter: DualHead=yes
Option: ManualOverride=yes
Parameters for wnos INI, {username} INI, and $MAC INI les 67