Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
Yes/no option to use an alternate IP address returned from an ICA
master browser to get through rewalls. This setting in a wnos.ini
le will be saved into NVRAM if EnableLocal=yes is set in the
wnos.ini le.
AutoDetectNetwork={yes, no}
RDP Only.
Default is yes.
Yes/no option to enable RDP auto detect network feature. When
this option is set to yes the Optimize for low speed link and the
Desktop Experience options are disable by default.
**AutoSigno={no, yes, 2-60}
[Shutdown={no, yes}]
[Reboot={no, yes}]
Default is no.
AutoSigno —This option can be used to automatically sign-o a
user when the last opened session is closed. The default value is
no. A value ranging from 2 to 60 can be congured. This value
represents the number of seconds a session must be active prior to
calling AutoSignO.
Shutdown — Default is no. Yes/no option to shut down the thin
client. If shutdown is set to yes, the ShutdownCounter value is used
to control the count-down before the system is turned o.
Reboot — Default is no. Yes/no option to reboot the thin client. If
Reboot is set to yes, the ShutdownCounter value is used to control
the count down before the system is rebooted.
ClearLicense={no, yes}
Default is no.
Yes/no option to clear the TSCAL license stored in the non-volatile
memory. It can be replaced by FixLicense=clean.
Connect={ICA, RDP}
Connect — Connection protocol. Follow the ICA option list, see
ICA Connect Options or RDP option list, see RDP Connect Options.
Any options you use for your connection must be on the same
logical line; \can be used for line continuation, see Rules and
Recommendations for Constructing the INI Files.
ConnectionBroker={default, Microsoft, Quest, VMware} Default is default.
Species the Connection Broker type. Select VMware to enable
VDM XML support. If you enter VMware, the VMware logo appears
on the login screen.
For Dell vWorkspace broker, ConnectionBroker=Quest is
recommended.
*Device=Ethernet
[Speed={Auto, 10M HD, 10M FD, 100M HD,
100M FD, or 1000M}
[MTU=mtu]
[KeepAlive={1-600}]
[Warning={no, yes}]
Device — Species to use an Ethernet.
Speed — Default is auto. Species the ethernet speed to either
Auto, 10 MHD, 10 M FD, 100 M HD, 100 M FD, or 1000 M. If Speed
is set in a wnos.ini le, the Speed statement in the {username}.ini
le will be disabled.
NOTE:
Device and Speed parameters can be replaced by the
EthernetSpeed parameter.
Parameters for wnos INI, {username} INI, and $MAC INI les 69