Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
[HideTaskbar={0, 1, 2, 3}]
[FullscreenReserved={no, yes}]
HideTaskbar — Default is 0. Species the status of the taskbar
when maximizing the seamless window.
0 — Do not hide the taskbar.
1 — Taskbar will be hidden when maximizing the seamless window
to full screen. Moving the mouse over the lowest bottom of the
screen will display the taskbar. This setting excluding the
FullscreenReserved parameter in a wnos.ini le will be saved into
NVRAM if EnableLocal=yes is set in the wnos.ini le.
NOTE:
• When set Seamless=yes HideTaskbar=2, it removes the
auto-hide taskbar function but it reports the full
resolution to the ICA server in a similar way to
HideTaskbar=1.
• When set Seamless=yes HideTaskbar=3, the maximized
size does not cover the taskbar, but the session size on
the server side is reported as the full-screen size.
• When set Seamless=yes FullscreenReserved and the
applications are congured for fullscreen mode, they will
be launched in fullscreen mode, not seamless mode.
SecureMatrixServer=<SecureMatrix Server
Host name or IP address/FQDN or URL>
[EnableSelectTable]
Species the Host name or IP address/FQDN or URL of the Secure
Matrix server. Http or https protocol usage is decided by the server
conguration. If SecureMatrixServer is dened, the user must pass
authentication with the Secure Matrix server rst, and then there is
a seamless log in to the brokers if the server can provide the
correct broker credentials, if not, the user must enter broker
credentials to log in.
For Example: SecureMatrixServer=https://gsb01.bjqa.com
NOTE:
Before using this parameter, use the Secure Matrix
documentation to set up the Matrix Server. Also, be sure you
import the relevant GSB Server Certicate le when using
https.
EnableSelectTable enables you to select the table type (3 or 4 tabs)
when you change the password (SMXBridge server 3.9 start
supports this feature). Default value is No.
SelectGroup={no, yes}
[Default=default_desc]
description=group1
[groupname=name1]
[description=group2]
[groupname=name2]
Default is no.
SelectGroup — Yes/no option to allow a user to select from a
group list on the Log on dialog box during a log in. If yes, the
description will display in the group list box.
groupname — The group name is used to identify the group
including the directory and le name. If not dened, the description
will become the group name.
The Default option following "SelectGroup=yes" can specify the
default group. The value is one of group description dened after
that. After you select another group and sign o, this default group
will be selected.
Parameters for wnos INI, {username} INI, and $MAC INI les 83