Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
[EnableGFX]={yes, no}]
[EnableVOR={yes, no}]
[EnableRdpH264]={yes, no}]
[EnableRecord={yes, no}]
[EnableRFX={yes, no}]
[USBRedirection={TCX, RDP}]
[RDPScreenAlign4={yes,no}]
[WallPaper={yes, no}]
[Dragging={yes, no}]
[Animation={yes, no}]
[Theme={yes, no}]
[TosIpPrecedence={0-5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/
CS5/CS6/CS7/AF11/AF12/AF13/AF22/AF23/
AF31/AF32/AF33/AF42/AF43/EF}]
[AutoDetectNetwork={yes, no}]
[TSGWEnable={yes, no}]
[GracefulReconnTimeout={10 - 100}]
[ForceUpdatedNLA={yes, no}]
[TsgwWebsock={yes, no}]
EnableTSMM
— Default is yes . Yes/no option to enable RDP7
Multi-media redirect.
EnableGFX —The option when set to yes, enables RDP8 Pipelined
Graphics feature. Default is yes for all platforms other than Wyse
3010 thin client with ThinOS (T10). If this option is congured as
no, the option EnableVOR and option EnableRdpH264 will be
internally set to no despite of the settings in INI.
EnableVOR — Default is yes. H.264. Yes/no option to enable
RDP8 Video Optimized Redirect.
NOTE: The EnableVOR parameter is not supported on C
or V class.
EnableRdpH264— Default is yes. This option enables RDP8.1 h.
264 graphics feature. This option is internally set to no if the option
EnableGFX is set to no manually or by default.
EnableRecord — Default is yes . Yes/no option to enable RDP
feature of recording from local.
EnableRFX — Default is yes. Yes/no option to enable Bitmap
Codec RemoteFX.
USBRedirection — Default is TCX . Option to select the channel
of USB devices redirection.
RDPScreenAlign4 — Default is no. RDPScreenAlign4=yes can
force RDP session width to 4 pixels aligned.
For example:
SessionConfig=RDP MaxBmpCache=1024
DefaultColor=1 EnableNLA=yes ForceSpan=yes
EnableTSMM=no EnableRecord=yes EnableRFX=no
RDPScreenAlign4=no
The options Wallpaper, Dragging, Animation and Theme can set the
RDP experience. Default is yes.
TosIpPrecedence — Allows you to set IP Precedance in the TOS
elds.
TosDscp — Sets IP DSCP in the TOS elds.
AutoDetectNetwork —Default is yes. Yes/no option to enable an
RDP session to adapt its data transfer to band width of network.
TSGWEnable—Default is yes. Yes/no option to obtain/enable TS
gateway for the applications and desktops from Microsoft RDS
broker server. The default value is yes which means that the TS
Gateway setting is automatically obtained or enabled from the
Microsoft RDS broker server.
GracefulReconnTimeout—This value is to set a timeout for RDP
to reconnect the session if no response is received from server side
during this time limit. It avoids the case of RDP session freezing for
a long time and not reconnecting due to poor network quality or
short time network disconnection. There is no default value for this
option. The feature is disabled if it is not set. Valid value is 10 to 100,
in seconds.
90
Parameters for wnos INI, {username} INI, and $MAC INI les