Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
Limitation: Certain sessions in Windows10 servers disconnect and
reconnect when the session is idle with this parameter enabled. The
issue occurs when H.264-AVC444 is enabled without RemoteFX/
vGPU support on server side. You can avoid the issue by not
conguring H.264-AVC444 policy in the server.
ForceUpdatedNLA—This option allows the client side force server
to use updated CredSSP, which is a remediation of vulnerability
CVE-2018-0886. If the value is set to yes, the client disconnects
the session during session set up when the server uses unpatched
CredSSP. The default value is no.
TsgwWebsock—This option is used to set websocket if a
connection is used between client and Window 2016 Terminal
Service Gateway. The default value is No.
SessionCong=Blast
[EnableH264={yes,no}]
[NetworkCondition={ Excellent,Typical, Poor }]
[EnableH264={yes,no}] —This parameter controls the Blast H264
feature on the supported platforms. The default value is yes. The
value yes enables H264 and the value no disables H264.
This works on Blast H.264 supported platforms only.
NetworkCondition—This parameter controls the Blast network
condition. The default value is Typical. The following are the values
and associated actions:
Excellent—Network is very good.
Typical—Network is normal.
Poor—Network is bad.
This parameter impacts the Blast to select UDP or TCP. When the
network is Excellent and Typical, the Blast selects TCP. When it is
Poor, the Blast selects UDP.
TcpMaxRetransmission={2~12}
Congures the retransmission of a TCP connection. The default
value of this option is 5.
TerminalName=name
[reboot={yes, no}]
[Capital={yes, no}]
User can set a string up to 15 characters as terminal name. It can
be congured as system variable like $MAC, $SN or $IP etc.
If reboot is set to yes and the terminal name is changed, the
terminal will reboot.If "TerminalName=$DNS" is set, the system will
do reverse DNS lookup to congure the terminal name. For
example, if the DNS server congures the terminal IP as reverse
dns name p12345.wysespt.com, the terminal name will be
congured as p12345. If you set Capital=yes, the terminal name is
capitalized.
**UniSession={no, yes} Yes/no option to launch the connection only once at a time.
VDIBroker=vdi_broker_url
[AutoConnectList={*|host1;host2;host3…}]
VDIBroker — Species the VDI broker server; supports both http
and https.
If the vdi_broker_url does not start with http or https, the default
protocol used is http. For an https connection, only one URL is
accepted.
Parameters for wnos INI, {username} INI, and $MAC INI les 91