Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[NoSessionTimer=0-480] Specifies that if there is no keyboard or mouse use in the
configured time in minutes, it will sign off or shutdown or
reboot depending on AutoSignoff= …
If NoSessionTimer is set, then when there is an active
sessions, use this timer to replace the Inactive value.
The following controls whether to reboot or shutdown or sign
off.
AutoSignoff=yes [Shutdown=yes]
[Reboot=yes]
IPProto=ICMP
[DisableTStamp={yes, no}]
[DisableEcho={yes, no}]
Configures the ICMP protocol.
DisableTStamp — If DisableTStamp=yes, the system will not
reflect the ICMP timestamp (13) request.
DisableEcho — If DisableEcho=yes, the system will not
reflect the ICMP echo (8) request. In this case, the unit
cannot be pinged.
**LowBand={no, yes}
Default is no.
Yes/no option to enable optimization for low speed
connections, such as reducing audio quality or decreasing
protocol-specific cache size or both.
This setting in a wnos.ini file will be saved into NVRAM, if
EnableLocal=yes is set in the wnos.ini file.
MMRCodecConfig=AUDIO
[disableac3={no, yes}]
[disablempeg={
no, yes}]
[disablewma1={no, yes}]
[disablewma2={no, yes}]
[disablewma3={no, yes}]
[disablemp3={
no, yes}]
[disablepcm={no, yes}]
MMRCodecConfig — Only for platforms with TCX
Multimedia. Specifies the audio to allow the disabling of the
various codec options when playing audio.
disableac3 — Default is no. Yes/no option to disable the ac3
codec when playing audio.
disablempeg — Default is no. Yes/no option to disable the
mpeg codec when playing audio.
disablewma1 — Default is no. Yes/no option to disable the
wma1 codec when playing audio.
disablewma2 — Default is no. Yes/no option to disable the
wma2 codec when playing audio.
disablewma3 — Default is no. Yes/no option to disable the
wma3 codec when playing audio.
disablemp3 — Default is no. Yes/no option to disable the
mp3 codec when playing audio.
disablepcm — Default is no. Yes/no option to disable the
pcm codec when playing audio.
MMRCodecConfig=VIDEO
[disablempeg1={no, yes}]
[disablempeg2={no,
yes}] [disablejpeg={no, yes}]
[disablewmv1={no, yes}]
[disablewmv2={no, yes}]
MMRCodecConfig — Only for platforms with TCX
Multimedia. Specifies the video to allow the disabling of the
various codec options when playing video.
disablempeg1 — Default is no. Yes/no option to disable the
mpeg1 codec when playing video.
disablempeg2 — Default is yes. Yes/no option to disable the
mpeg2 codec when playing video.
76 Parameters for wnos INI, {username} INI, and $MAC INI files