Administrator Guide

Parameter Description
MicMute={yes, no} Default is no
If MicMute is set to yes, then it mutes the microphone volume.
MicVolume=<0-100> Determines the microphone volume level.
MgmtDiscoveryMethod= {SRV, HOSTNAME, CNAME,
STATIC, ALL, DHCP }
Default is ALL .
The Discovery method used for nding WDM server.
NTP.Enable={yes, no} Default is no.
It Species that the NTP daemon should be enabled and started.
NOTE: NTP server will not be started if an
NTP.TimeServer parameter is not specied and the thin
client does not have one previously set.
NTP.TimeServer=<NTP Server IP or FQDN> [;<NTP Server IP
or FQDN>;....}
Default is None.
It species one or more NTP server IP Addresses or FQDNs.
PermitSshRootLogin={yes, no} Default is no, It used to prohibit the root SSH login. You can
enable or disable the root login through SSH. It works only if SSH
is enabled.
PowerButtonAction ={interactive, reboot, restart, halt,
shutdown, none, nothing}
Default is interactive
It species system behavior when the power button is pressed.
none or nothing: Power button is ignored, that is no action.
Interactive: An optional window is presented to you.
halt or shutdown: Shuts down the devices.
reboot or restart: Reboots the devices.
ProgressUpdateInterval=<10–60> Default is 20
The interval specied for sending image upgrade status to WDM
server. Value less than 10 will be rounded to 10 and Value greater
than 60 will be rounded to 60.
PasswordEncryptionCode={0, 1, 2} Default value is 1
Species the desired password encryption algorithm in INI. This
parameter must be place at least before the rst password used
in the wlx.ini le.
0: Plain Text
1: Base64 encoded
2: AES encoded
RootPath=<string> Default is /wyse
This path is used to access INI les on the server.
15